Mikel Leturia

Maître de Conférences (HDR), Université de Technologie de Compiègne
90
Documents
Affiliation actuelle
  • Transformations Intégrées de la Matière Renouvelable (TIMR)
Identifiants chercheurs

Domaines de recherche

Génie des procédés

Publications

Publications

Assessment of the influence of model powder characteristics on their flowability using correlation matrices

Lina Cayla Arianer , Mikel Leturia , Anne-Charlotte Robisson , Carine Ablitzer , Elias Daouk et al.
Powder Technology, 2025, 453, pp.120636. ⟨10.1016/j.powtec.2025.120636⟩
Article dans une revue hal-04961412 v1

Synthesis and optimization of biobased carbon adsorbent monoliths from chitosan-polybenzoxazine for efficient CO2 capture

José Mosquera , Liana Delevingne , Frédéric Delbecq , Elias Daouk , Audrey Drelich et al.
RSC Advances, 2025, 15 (9), pp.6783-6793. ⟨10.1039/D5RA00110B⟩
Article dans une revue hal-04976953 v1
Image document

Batch Reactor Design and Conception at Laboratory Scale for Solid-State Anaerobic Digestion: Practical Comparison Between 3D-Printed Digesters and Conventional Methods

Arnaud Dujany , Franco Otaola , Laura André , Amar Naji , Denis Luart et al.
Article dans une revue hal-04900909 v1
Image document

Numerical study of dense powder flow in a rotating drum: Comparison of CFD to experimental measurements

Lucas Chatre , Xavier Lemerle , Marc Bataille , Florian Herbelet , Marie Debacq et al.
Powder Technology, 2024, 444, pp.119981. ⟨10.1016/j.powtec.2024.119981⟩
Article dans une revue hal-04613063 v1
Image document

Efficient Preparation and Optimization of Activated Carbon Monoliths from Resorcinol-Formaldehyde Resins for CO2 Capture

José Mosquera , Frédéric Delbecq , Elias Daouk , Audrey Drelich , Khashayar Saleh et al.
Processes, 2024, 12 (8), pp.1604. ⟨10.3390/pr12081604⟩
Article dans une revue hal-04707326 v1

Additive manufacturing of microstructured reactors for organometallic catalytic reactions

Franco Otaola , Stéphane Mottelet , Erwann Guénin , Denis Luart , Mikel Leturia
Lab on a Chip, 2023, 23 (4), pp.702-713. ⟨10.1039/D2LC00816E⟩
Article dans une revue hal-04380411 v1
Image document

A continuous flow mode with a scalable tubular reactor for the green preparation of stable alkali lignin nanoparticles assisted by ultrasound

Ibrahim Assaf , Zhao Zhang , Franco Otaola , Mikel Leturia , Denis Luart et al.
International Journal of Biological Macromolecules, 2023, 243, pp.125106. ⟨10.1016/j.ijbiomac.2023.125106⟩
Article dans une revue hal-04218139 v1
Image document

Taking advantage of a 3D printing imperfection in the development of sound-absorbing materials

Tomasz G Zieliński , Nicolas Dauchez , Thomas Boutin , Mikel Leturia , Alexandre Wilkinson et al.
Applied Acoustics, 2022, 197, pp.108941. ⟨10.1016/j.apacoust.2022.108941⟩
Article dans une revue hal-04198669 v1
Image document

Comparison of two powder conditioning methods to improve UO2 powder flowability for press die filling

Élodie Beaunac , Mikel Leturia , A.-C. Robisson , C. Ablitzer , Kashayar Saleh
Powder Technology, 2022, 395, pp.1-13. ⟨10.1016/j.powtec.2021.09.003⟩
Article dans une revue hal-04380395 v1
Image document

A novel technique for Residence Time Distribution (RTD) measurements in solids unit operations

Atena Dehghani Kiadehi , Mikel Leturia , Franco Otaola , Aïssa Ould-Dris , Khashayar Saleh
Advanced Powder Technology, 2021, 32 (2), pp.611-618. ⟨10.1016/j.apt.2021.01.006⟩
Article dans une revue hal-03166044 v1
Image document

Impact of fine particles on rheological properties of uranium dioxide powders

A. Madian , K. Saleh , C. Ablitzer , P. Matheron , M. Leturia et al.
Nuclear Engineering and Design, 2020, 52, pp.1714-1723. ⟨10.1016/j.net.2020.01.012⟩
Article dans une revue cea-02339845 v1
Image document

Characterization of caking for crystalline materials: Comparison and statistical analysis of three mechanical tests

Sophie Samain , Mikel Leturia , Stéphane Mottelet , Mohammed Benali , Khashayar Saleh
Chemical Engineering Science, 2019, 195, pp.218-229. ⟨10.1016/j.ces.2018.11.048⟩
Article dans une revue hal-02017563 v1
Image document

Comparative study of different storage bed designs of a solid-state hydrogen tank

Mohamed Sakreddine Manai , Mikel Leturia , Carsten Pohlmann , Jorn Oubraham , Stéphane Mottelet et al.
Journal of Energy Storage, 2019, 26, pp.101024. ⟨10.1016/j.est.2019.101024⟩
Article dans une revue hal-02459251 v1

Modeling and experimental investigation of a Wurster type fluidized bed reactor coupled with an air atmospheric pressure plasma jet for the surface treatment of polypropylene particles

Seyedshayan Tabibian , Farzaneh Arefi-Khonsari , Abdessadk Anagri , Mikel Leturia , Antoine Moussalem et al.
Plasma Processes and Polymers, 2018, 15 (11), pp.e1800071. ⟨10.1002/ppap201800071⟩
Article dans une revue hal-01978437 v1
Image document

Analysis of the periodic motion in a powder rheometer and development of a new flowability testing method

Ming Li , Mikel Leturia , Khashayar Saleh
kona powder and particle journal, 2018, 35, pp.160--171. ⟨10.14356/kona.2018002⟩
Article dans une revue hal-02148541 v1

Caking of sucrose: Elucidation of the drying kinetics according to the relative humidity by considering external and internal mass transfer

Sophie Samain , Marina Dupas-Langlet , Mikel Leturia , Mohammed Benali , Khashayar Saleh
Journal of Food Engineering, 2017, 212, pp.298-308. ⟨10.1016/j.jfoodeng.2017.05.020⟩
Article dans une revue hal-04380356 v1

An overview of the role of capillary condensation in wet caking of powders

Zahra Afrassiabian , Mikel Leturia , Mohamed Benali , Mohamed Guessasma , Khashayar Saleh
Chemical Engineering Research and Design, 2016, 110, pp.245-254. ⟨10.1016/j.cherd.2016.03.020⟩
Article dans une revue hal-03630496 v1

Characterization of flow properties of cohesive powders: A comparative study of traditional and new testing methods

Mikel Leturia , M. Benali , S. Lagarde , I. Ronga , K. Saleh
Powder Technology, 2014, 253, pp.406-423. ⟨10.1016/j.powtec.2013.11.045⟩
Article dans une revue hal-02190981 v1

Natural gas oxy-combustion with flue gas recycling for CO2 capture

Ammar Bensakhria , Mikel Leturia
Chemical Engineering Transactions, 2010, 21, ⟨10.3303/CET1021107⟩
Article dans une revue hal-04380344 v1

Simulation of UO2 particles behavior in a powder rheometer

Lina Cayla Arianer , Mikel Leturia , Elias Daouk , Anne-Charlotte Robisson , Carine Ablitzer et al.
11th International Conference on Conveying and Handling of Particulate Solids (CHoPS 2024), 2024, Edinburgh, United Kingdom
Communication dans un congrès hal-04757224 v1

Pneumatic conveying of irregular solids: experimental study and CFD- DEM simulation at pilot scale

Manuela Lucia Quezada Henry , Elias Daouk , Mikel Leturia , Jelena Macak , Mathieu Morin et al.
11th International Conference on Conveying and Handling of Particulate Solids (CHoPS 2024), 2024, Edinburgh, United Kingdom
Communication dans un congrès hal-04757230 v1

Couplage expérimentation et simulation DEM pour la compréhension et la prédiction de l’écoulement de poudres

Lina Cayla , Mikel Leturia , Elias Daouk , Anne-Charlotte Robisson , Carine Ablitzer et al.
11ème Colloque Sciences et Technologies des Poudres (STP 2024), 2024, Montpellier, France
Communication dans un congrès hal-04757288 v1

Etude expérimentale et simulation CFD-DEM du transport pneumatique à échelle pilote en vue de l’étude de solides non conventionnels

Manuela Lucia Quezada Henry , Elias Daouk , Mikel Leturia , Jelena Macak , Mathieu Morin et al.
11ème Colloque Sciences et Technologies des Poudres (STP 2024), 2024, Montpellier, France
Communication dans un congrès hal-04757293 v1

Étude et modélisation des phénomènes de transport et réactionnels dans un four à vis

Lucas Chatre , Florian Herbelet , Tojonirina Randriamanantena , Marie Debacq , Jeremy Nos et al.
Journées 2024 du GDR Morphea, Morphea - GDR n° 2021, Jun 2024, Marcoule, France
Communication dans un congrès hal-04629841 v1

Etude hydrodynamique du transport pneumatique de solides non- conventionnels et simulation CFD-DEM

Manuela Lucia Quezada Henry , Elias Daouk , Mikel Leturia , Jelena Macak , Mathieu Morin et al.
19ème Congrès de la Société Française de Génie des Procédés (SFGP 2024), 2024, Deauville, France
Communication dans un congrès hal-04757299 v1

Captage du CO2 par procédé Temperature Swing Adsorption (TSA) assisté par énergie solaire

Souraya Osman , Rémi Gautier , Ugo Pelay , Daniel Bougeard , Mikel Leturia
19ème Congrès de la Société Française de Génie des Procédés, Oct 2024, Deauville, France
Communication dans un congrès hal-04748040 v1

Modelling dense powder flow with CFD inside a rotating drum and a screw reactor

Lucas Chatre , Xavier Lemerle , Marc Bataille , Florian Herbelet , Marie Debacq et al.
1st European Fluid Dynamics Conference (EFDC1), 2024, Aachen, Germany
Communication dans un congrès hal-04757240 v1

Preparation of robust carbon monoliths derived from phenolic resin for CO2 separation

Jose Euliser Mosquera Ruiz , F. Delbecq , Elias Daouk , Audrey Berthauld-Drelich , Khashayar Saleh et al.
Formula XI, Jul 2023, Lille, France
Communication dans un congrès hal-04417408 v1

Développement de charbon actif à partir de résine phénolique pour la séparation du CO2

Liana Delevingne , Jose Euliser Mosquera Ruiz , Frédéric Delbecq , Elias Daouk , Audrey Drelich et al.
Colloque Chimie Durable 2023, Division de Chimie Durable de la SCF, Sep 2023, Paris, France
Communication dans un congrès hal-04757555 v1

Development of nitrogen-enriched porous carbons from polybenzoxazines for CO2 separation

Jose Euliser Mosquera Ruiz , Frédéric Delbecq , Elias Daouk , Audrey Drelich , Khashayar Saleh et al.
14th European Congress of Chemical Engineering and 7th European Congress of Applied Biotechnology (ECCE 14 & ECAB 7), 2023, Berlin, Germany
Communication dans un congrès hal-04757218 v1

Caractérisation expérimentale de la Distribution de Temps de Séjour dans des réacteurs structurés fabriqués par impression 3D

Franco Otaola , Stéphane Mottelet , Erwann Guénin , Denis Luart , Mikel Leturia
18ème Congrès de la Société Française de Génie des Procédés (SFGP 2022), 2022, Toulouse, France
Communication dans un congrès hal-04757286 v1

3D printed sound-absorbing materials with double porosity

Tomasz G Zieliński , Nicolas Dauchez , Thomas Boutin , Mikel Leturia , Alexandre Wilkinson et al.
51st International Congress and Exposition on Noise Control Engineering (Inter-noise 2022), 2022, Glasgow, United Kingdom
Communication dans un congrès hal-04757208 v1

Development of nitrogen-enriched porous carbons from polybenzoxazines for CO2 separation

Jose Euliser Mosquera Ruiz , F. Delbecq , Elias Daouk , Audrey Drelich , Khashayar Saleh et al.
Journées de Formulation 2022 de la Société Chimique de France, Nov 2022, Limoges, France
Communication dans un congrès hal-04417584 v1

Methodology for the development and optimization of Periodic Open Cell Structured reactors

Franco Otaola , Victor Pozzobon , Denis Luart , Mikel Leturia
17th OpenFOAM Workshop (OFW17), 2022, Cambridge, United Kingdom
Communication dans un congrès hal-04757551 v1

Méthodologie pour la simulation et l’optimisation de réacteurs structurés (Periodic Open Cell Structured reactors)

Franco Otaola , Victor Pozzobon , Denis Luart , Mikel Leturia
5th French/Belgian OpenFOAM® users conference, 2022, Lyon, France
Communication dans un congrès hal-04757553 v1

Development of 3D printed microreactors for organometallic catalytic reactions

Franco Otaola , Stéphane Mottelet , Erwann Guénin , Denis Luart , Mikel Leturia
26th International Congress of Chemical and Process Engineering (CHISA 2022), 2022, Prague, Czech Republic
Communication dans un congrès hal-04757193 v1

An optimal calibration procedure for the Discrete Element Method

Farheez Mohamed , Elias Daouk , Mikel Leturia , Élodie Beaunac , Anne-Charlotte Robisson et al.
The 10th International Conference on Conveying and Handling of Particulate Solids (CHoPS), Jul 2022, Salerno, Italy
Communication dans un congrès hal-04417134 v1

Minimisation de la quantité de poudre dans un protocole de caractérisation des propriétés rhéologiques à l’aide d’un rhéomètre FT4

Élodie Beaunac , Mikel Leturia , Anne-Charlotte Robisson , Carine Ablitzer , Khashayar Saleh
Colloque Sciences et Technologies des Poudres et Matériaux Frittés (STPMF 2021), 2021, Saint-Etienne, France
Communication dans un congrès hal-04757282 v1

Additive manufacturing and flow chemistry applied to the development of catalytic structured reactors

Franco Otaola , Denis Luart , Mikel Leturia
Journées de Formulation de la Société Chimique de France (JF 2021), 2021, Compiègne, France
Communication dans un congrès hal-04757548 v1

Additive manufacturing, residence time distribution characterization and flow chemistry applied to the development of microreactors

Franco Otaola , Stéphane Mottelet , Jérémy Terrien , Erwann Guénin , Denis Luart et al.
International Congress of Chemical and Process Engineering (CHISA 2021), 2021, Virtual Congress, Czech Republic
Communication dans un congrès hal-04757185 v1

Residence Time Distribution characterization of additive manufactured microstructured reactors

Franco Otaola , Stéphane Mottelet , Jérémy Terrien , Erwann Guénin , Denis Luart et al.
3th European Congress of Chemical Engineering and 6th European Congress of Applied Biotechnology (ECCE 13 & ECAB 6), 2021, Online Event, France
Communication dans un congrès hal-04757191 v1

Méthode optimisée de calibrage des paramètres de simulation par la méthode des éléments discrets

Farheez Mohamed , Elias Daouk , Élodie Beaunac , Mikel Leturia , Anne-Charlotte Robisson et al.
Colloque « Science et Technologie des Poudres et Matériaux frittés (STPMF 2021) », Jul 2021, Saint Etienne, France
Communication dans un congrès hal-04417604 v1

Additive manufacturing, flow chemistry and multi-physics simulation applied to the development and optimization of microreactors

Franco Otaola , Denis Luart , Mikel Leturia
Intechem Process 2020, 2020, Compiègne, France
Communication dans un congrès hal-04757547 v1

UO2 powder characteristics and flowability: Impact of powder metallurgy process

Élodie Beaunac , Anne-Charlotte Robisson , Carine Ablitzer , Khashayar Saleh , Mikel Leturia
European Powder Metallurgy Congress (EuroPM 2020), 2020, Virtual Congress, France
Communication dans un congrès hal-04757167 v1

Séchage de gouttes isolées en lévitation

Khashayar Saleh , Paolo Testa , Mikel Leturia , Yorick Buot de L'Epine , Nicolas Dauchez
Journées Scientifiques du GDR MORPHEA, Oct 2020, Aubervilliers, France
Communication dans un congrès hal-04757560 v1

CFD study of the pressure drop in Periodic Open Cell Structures and the influence of their geometric properties

Franco Otaola , Stéphane Mottelet , Erwann Guénin , Denis Luart , Mikel Leturia
17ème Congrès de la Société Française de Génie des Procédés (SFGP 2019), 2019, Nantes, France
Communication dans un congrès hal-04757277 v1

Influence d’un mélangeur en V sur les caractéristiques physiques et rhéologiques de poudres d’oxyde d’uranium

Élodie Beaunac , Pierre Matheron , Anne-Charlotte Robisson , Carine Ablitzer , Khashayar Saleh et al.
17ème Congrès de la Société Française de Génie des Procédés (SFGP 2019), 2019, Nantes, France
Communication dans un congrès hal-04757274 v1
Image document

Etude des proprietes rheologiques de melanges de poudres d'oxyde d'uranium

A. Madian , K. Saleh , C. Ablitzer , P. Matheron , M. Leturia et al.
Colloque Science et Technologie des Poudres 2018, Jul 2018, Compiègne, France
Communication dans un congrès cea-02338598 v1

Evaluation of the influence of nano-additives on powder fluidization properties with the Anton Paar Powder Rheometer

Mikel Leturia , Denis Schutz , Khashayar Saleh
9ème Colloque Sciences et Technologies des Poudres (STP 2018), 2018, Compiègne, France
Communication dans un congrès hal-04757270 v1

Etude expérimentale et numérique d’un système de stockage d’hydrogène sous forme solide

Mohamed Sakreddine Manai , Mikel Leturia , Carsten Pohlmann , Jorn Oubraham , Stéphane Mottelet et al.
Intechem Process 2018, 2018, Compiègne, France
Communication dans un congrès hal-04757544 v1

Modeling and experimental investigation of a Wurster type fluidized bed reactor (W-FBR) coupled with an air Atmospheric Pressure Plasma Jet (APPJ) for the treament of PolyPropylene (PP) powders

Seyedshayan Tabibian , Farzaneh Arefi-Khonsari , Saleh Khashayar , Mikel Leturia , Mario Moscosa-Santillan et al.
16 th International Conference on Plasma Surface Engineering (PSE), Sep 2018, Garmish-Partenkirchen, Germany
Communication dans un congrès hal-03978408 v1

Modeling and experimental study of a Wurster type fluidized bed reactor coupled with an atmospheric pressure plasma jet (APPJ) for the treatment of polypropylene (PP) powders

Seyedshayan Tabibian , Farzaneh Arefi-Khonsari , Mikel Leturia , Mario Moscosa-Santillan , Antoine Moussalem et al.
16ème Journée des doctorants et post-doctorants de l' Institut des Matériaux de Paris Centre (IMPC), Institut des Matériaux de Paris Centre (IMPC) - UPMC, Feb 2018, Paris, France
Communication dans un congrès hal-04019346 v1

Etude de l’influence des transferts thermiques interne et externe sur les cinétiques apparentes dans différentes configurations de lit d’hydrure métallique pour le stockage d’hydrogène

Mohamed Sakreddine Manai , Mikel Leturia , Stéphane Mottelet , Khashayar Saleh , Jorn Oubraham et al.
9ème Colloque Sciences et Technologies des Poudres (STP 2018), 2018, Compiègne, France
Communication dans un congrès hal-04757265 v1
Image document

Impact of spheroidization of UO$_2$ powders on the filling of press molds

A. Madian , C. Ablitzer , P. Matheron , K. Saleh , M. Leturia et al.
8th World Congress on Particle Technology, Apr 2018, Orlando, United States
Communication dans un congrès cea-02338965 v1

Comparison of three mechanical tests for characterizing sucrose caking

Sophie Samain , Mikel Leturia , Mohammed Benali , Khashayar Saleh
16ème Congrès de la Société Française de Génie des Procédés (SFGP 2017), 2017, Nancy, France
Communication dans un congrès hal-04757258 v1

Etude des propriétés rhéologiques de poudres d'oxyde d'uranium

Ahmed Madian , Carine Ablitzer , Khashayar Saleh , Mikel Leturia , Pierre Matheron et al.
16ème Congrès de la Société Française de Génie des Procédés (SFGP 2017), 2017, Nancy, France
Communication dans un congrès hal-04757256 v1

A novel technique for particle residence time distribution measurement in solid unit operations

Atena Dehghani Kiadehi , Khashayar Saleh , Mikel Leturia , Aïssa Ould-Dris
16ème Congrès de la Société Française de Génie des Procédés (SFGP 2017), 2017, Nancy, France
Communication dans un congrès hal-04757252 v1

Modeling and experimental study of a Wurster type fluidized-bed reactor coupled with an atmospheric pressure plasma jet (APPJ) for the treatment of polypropylene (PP) powders

Seyedshayan Tabibian , Farzaneh Arefi-Khonsari , Saleh Khashayar , Mikel Leturia , Antoine Moussalem et al.
http://cppa2017.inflpr.ro/, Jun 2017, Bucarest, Romania
Communication dans un congrès hal-04025956 v1

Assessment set-up for solid-state hydrogen storages for small mobile applications

Mohamed Sakreddine Manai , Mikel Leturia , Khashayar Saleh , Jorn Oubraham , Carsten Pohlmann
7th World Hydrogen Technology Convention, 2017, Prague, Czech Republic
Communication dans un congrès hal-04757155 v1

DEM simulation of powder caking process under humid conditions

Homayra Tavares , M. Guessasma , Zahra Afrassibian , Mikel Leturia , Khashayar Saleh
22nd International Congress of Chemical and Process Engineering (CHISA 2016), 2016, Prague, Czech Republic
Communication dans un congrès hal-04757149 v1

Experimental study of sucrose caking

Sophie Samain , Marina Dupas-Langlet , Mikel Leturia , Mohammed Benali , Khashayar Saleh
Symposium On the Properties of Water, 2016, Lausanne, Switzerland
Communication dans un congrès hal-04757122 v1

Development of a Wurster type fluidized bed reactor coupled with an atmospheric plasma jet for the deposition of titanium oxide coating on micrometric particles: experiments and modelling

Seyedshayan Tabibian , Farzaneh Arefi-Khonsari , Mikel Leturia , Khashayar Saleh , Jérôme Pulpytel
15th International Conference on Plasma Surface Engineering (PSE 2016), 2016, Garmisch-Partenkirchen, Germany
Communication dans un congrès hal-04388822 v1

Caking of complex sucrose mixtures

Sophie Samain , Mohammed Benali , Mikel Leturia , Elisabeth van Hecke , Isabelle Pezron et al.
7th International Granulation Workshop, 2015, Sheffield, United Kingdom
Communication dans un congrès hal-04757097 v1

Development of a device allowing the study of sucrose caking

Sophie Samain , Mikel Leturia , Elisabeth van Hecke , Mohammed Benali , Khashayar Saleh
ECCE10-ECAB3-EPIC5, 2015, Nice, France
Communication dans un congrès hal-04757102 v1

High efficiency coating of sand particles with phosphorescent pigment in a fluidized bed: application in particle residence time distribution (RTD) measurements

Mikel Leturia , Atena Dehghani Kiadehi , Khashayar Saleh , Aïssa Ould-Dris
ECCE10-ECAB3-EPIC5, 2015, Nice, France
Communication dans un congrès hal-04757113 v1

Characterization of flow properties and hopper design with two shear testing methods

Ming Li , Mikel Leturia , Khashayar Saleh
5th UK-China and 13th UK Particle Technology Forum, 2015, Leeds, United Kingdom
Communication dans un congrès hal-04757542 v1

Mathematical modeling of fluidized-bed chlorination of metal oxides

Mikel Leturia , Diego Bertin , Mohammed Benali , Isabelle Ronga , Khashayar Saleh
7ème Colloque Sciences et Technologies des Poudres (STP 2012), 2012, Toulouse, France
Communication dans un congrès hal-04757249 v1

Coulabilité des poudres fines : étude comparative des méthodes de caractérisation

Mikel Leturia
Journées thématiques SFGP : Caractérisation des Poudres et Milieux Texturés 2012, 2012, Compiègne, France
Communication dans un congrès hal-04757540 v1

Modeling of carbochlorination of zirconium dioxide in a fluidized bed

Mikel Leturia , Diego Bertin , Mohammed Benali , Khashayar Saleh
Journées thématiques SFGP : Caractérisation des Poudres et Milieux Texturés 2010, 2010, Compiègne, France
Communication dans un congrès hal-04757538 v1

Natural gas oxy-combustion with flue gas recycling for CO2 capture

Ammar Bensakhria , Mikel Leturia
19th International Congress of Chemical and Process Engineering (CHISA 2010) and 7th European Congress of Chemical Engineering (ECCE 7), 2010, Prague, Czech Republic
Communication dans un congrès hal-04757085 v1

Mathematical modeling of fluidized-bed chlorination of ZrO2

Mikel Leturia , Diego Bertin , Mohammed Benali , Isabelle Ronga , Khashayar Saleh
IFPRI Annual General Meeting 2010, 2010, Liège, Belgium
Communication dans un congrès hal-04757534 v1

Unresolved CFD-DEM simulation of a pilot-scale pneumatic conveying system

Manuela Lucia Quezada Henry , Mikel Leturia , Elias Daouk , Thierry Destoop , Fabrice Bonny et al.
9th International conference on discrete elements methods DEM9, Sep 2023, Erlangen, Germany
Poster de conférence hal-04416864 v1

Discrete Element Modelling (DEM) of a granular material mixer: Zirconium sponge

Louise Le Brun , Elias Daouk , Eve Kalb , Mikel Leturia , Pascal Guerin et al.
9th International conference on discrete elements methods DEM9, Sep 2023, Erlangen, Germany
Poster de conférence hal-04416903 v1

DEM simulation to predict powder flow

Lina Cayla , Mikel Leturia , Elias Daouk , Anne-Charlotte Robisson , C. Ablitzer et al.
PARTEC 2023 International congress on particle technology, Sep 2023, Nuremberg, Germany
Poster de conférence hal-04416651 v1

Synthesis of activated carbon materials derived from phenolic resin for CO2 separation

Jose Euliser Mosquera Ruiz , F. Delbecq , Elias Daouk , Audrey Berthauld-Drelich , Khashayar Saleh et al.
ECCE&ECAB Conference, Sep 2023, Berlin, Germany
Poster de conférence hal-04416933 v1
Image document

Numerical and experimental analysis of spherical and non-spherical particles in a rotary drum: Metamodels for calibrating the friction coefficients in a rotary drum from DEM simuations

Marcela V C Machado , Artemio Plana-Fattori , Kevin Lachin , Stéphane Vitu , Cristian Trelea et al.
Partec 2023 (International Congress on Particle Technology), Sep 2023, Nuremberg, Germany
Poster de conférence hal-04333051 v1

Développement de solides carbonés poreux enrichis en azote à partir de résines polybenzoxazines pour la séparation du CO2

Jose Euliser Mosquera Ruiz , F. Delbecq , Elias Daouk , Audrey Drelich , Khashayar Saleh et al.
18e Congrès de la Société Française de Génie des Procédés (SFGP), Nov 2022, Toulouse, France
Poster de conférence hal-04417564 v1

Modélisation DEM d’un mélangeur de milieux granulaires : Eponge de zirconium

Eve Kalb , Elias Daouk , Mikel Leturia , Pascal Guerin , Khashayar Saleh
18e Congrès de la Société Française de Génie des Procédés (SFGP), Nov 2022, Toulouse, France
Poster de conférence hal-04417488 v1

Pneumatic Handling Of Bio And Recycled Solids (PHOBARS project)

Manuela Lucia Quezada Henry , Mikel Leturia , Elias Daouk , Thierry Destoop , Fabrice Bonny et al.
18e Congrès de la Société Française de Génie des Procédés (SFGP), Nov 2022, Toulouse, France
Poster de conférence hal-04417521 v1

Pneumatic Handling Of Bio And Recycled Solids (PHOBARS project), The 10th International Conference on Conveying and Handling of Particulate Solids (CHoPS)

Manuela Lucia Quezada Henry , Mikel Leturia , Elias Daouk , Thierry Destoop , Fabrice Bonny et al.
The 10th International Conference on Conveying and Handling of Particulate Solids (CHoPS), Jul 2022, Salerno, Italy
Poster de conférence hal-04417143 v1

Caractérisation rhéologique de particules de différentes tailles : comparaison de deux méthodes de mesure

Lina Cayla , Mikel Leturia , Elias Daouk , Anne-Charlotte Robisson , C. Ablitzer et al.
18e Congrès de la Société Française de Génie des Procédés (SFGP), Nov 2022, Toulouse, France
Poster de conférence hal-04417554 v1

Characterization of the physical and flow properties of non-conventional solids for pneumatic conveying (PHOBARS project)

Manuela Lucia Quezada Henry , Mikel Leturia , Elias Daouk , Thierry Destoop , Fabrice Bonny et al.
9th World Congress on Particle Technology (WCPT9), Sep 2022, Madrid, Spain
Poster de conférence hal-04416950 v1

Etude expérimentale et modélisation des réacteurs à lit fluidisé de carbochloration

Mikel Leturia
Sciences de l'ingénieur [physics]. Université de Technologie de Compiègne (UTC), 2013. Français. ⟨NNT : 2013COMP2097⟩
Thèse tel-04757609 v1