Access content directly

Philippe Lours

114
Documents
Researcher identifiers

Presentation

Publications

Image document

Fatigue properties of as-built and heat-treated Inconel 625 obtained by the hybridization of two laser-powder based additive processes

Noémie Martin , Anis Hor , Etienne Copin , Philippe Lours , Léon Ratsifandrihana
International Journal of Fatigue, 2023, 172, pp.107650. ⟨10.1016/j.ijfatigue.2023.107650⟩
Journal articles hal-04051964v1
Image document

Stress corrosion cracking behavior of austenitic stainless steel 316L produced using laser-based powder bed fusion

Ricardo Santamaria , Ke Wang , Mobin Salasi , Mehdi Salem , Philippe Lours
Corrosion, 2023, 4311, ⟨10.5006/4311⟩
Journal articles hal-04137623v1
Image document

Correlation between microstructure heterogeneity and multi-scale mechanical behavior of hybrid LPBF-DED Inconel 625

Noémie Martin , Anis Hor , Etienne Copin , Philippe Lours , Léon Ratsifandrihana
Journal of Materials Processing Technology, 2022, 303, pp.117542. ⟨10.1016/j.jmatprotec.2022.117542⟩
Journal articles hal-03596475v1
Image document

Impact of annealing treatment on the fatigue behavior of Inconel 625 produced by laser‐based powder bed fusion

Noémie Martin , Anis Hor , Etienne Copin , Philippe Lours , Léon Ratsifandrihana
Fatigue and Fracture of Engineering Materials and Structures, 2022, 45 (4), pp.1258-1275. ⟨10.1111/ffe.13648⟩
Journal articles hal-03523422v1
Image document

Thermal shock resistance of a NiCrAlY-coated alloy 625 system produced by laser powder bed fusion

Mathieu Terner , Jiwon Lee , Baptiste Ruggieri , Etienne Copin , Oxana Ostrovskaya
Surface and Coatings Technology, 2021, 417, pp.1-14/127217. ⟨10.1016/j.surfcoat.2021.127217⟩
Journal articles hal-03211765v1
Image document

Screening for Al2O3 failure in MCrAlY APS coatings using short-term oxidation at high temperature

Damien Texier , Maxime Ecochard , Thomas Gheno , Daniel Monceau , Mehdi Salem
Corrosion Science, 2021, 184, pp.1-15/109334. ⟨10.1016/j.corsci.2021.109334⟩
Journal articles hal-03196688v1
Image document

Apparent Interfacial Toughness of Undoped and Photoluminescent Eu3+-Doped Yttria-Stabilized Zirconia Thermal Barrier Coatings

Yankuan Liu , Etienne Copin , Sandrine Duluard , Thierry Sentenac , Zhiping P. Wang
Journal of Thermal Spray Technology, 2020, 29, pp.433-443. ⟨10.1007/s11666-019-00963-0⟩
Journal articles hal-02397243v1
Image document

High temperature oxidation of NiCrAlY coated Alloy 625 manufactured by selective laser melting

Damien Texier , Etienne Copin , Augustin Flores , Jiwon Lee , Mathieu Terner
Surface and Coatings Technology, 2020, 398, pp.1-14/126041. ⟨10.1016/j.surfcoat.2020.126041⟩
Journal articles hal-02872096v1
Image document

A novel approach to the production of NiCrAlY bond coat onto IN625 superalloy by selective laser melting

Jiwon Lee , Mathieu Terner , Etienne Copin , Philippe Lours , Hyun-Uk Hong
Additive Manufacturing, 2020, 31, pp.1-8/100998. ⟨10.1016/j.addma.2019.100998⟩
Journal articles hal-02404143v1
Image document

Heat treatments design for superior high-temperature tensile properties of alloy 625 produced by Selective Laser Melting

Jiwon Lee , Mathieu Terner , Sunyoung Jun , Hyun-Uk Hong , Etienne Copin
Materials Science and Engineering: A, 2020, 790, pp.1-15/139720. ⟨10.1016/j.msea.2020.139720⟩
Journal articles hal-02863894v1
Image document

On the thermal sensitivity and resolution of a YSZ:Er 3+ /YSZ:Eu 3+ fluorescent thermal history sensor

Stéphane Amiel , Etienne Copin , Thierry Sentenac , Philippe Lours , Yannick Le Maoult
Sensors and Actuators A: Physical , 2018, 272, p.42-52. ⟨10.1016/j.sna.2018.01.040⟩
Journal articles hal-01724604v1
Image document

Processing thermal barrier coatings via sol-gel route: crack network control and durability

Fabien Blas , Florence Ansart , Philippe Lours , Jean-Pierre Bonino , Sandrine Duluard
Surface and Coatings Technology, 2018, 334, pp.71-77. ⟨10.1016/j.surfcoat.2017.11.008⟩
Journal articles hal-01637109v1
Image document

Mechanical and thermo-physical properties of plasma-sprayed thermal barrier coatings: a literature survey

Pierre Planques , Vanessa Vidal , Philippe Lours , Vincent Proton , Fabrice Crabos
Oxidation of Metals, 2017, vol. 88 (n° 1-2), p.133-143. ⟨10.1007/s11085-016-9693-1⟩
Journal articles hal-01579759v1
Image document

Influence of isothermal aging conditions on APS TBC's interfacial fracture toughness

Yankuan Liu , Yinghui Liu , Philippe Lours , Thierry Sentenac , Vanessa Vidal
Surface and Coatings Technology, 2017, 313, pp.417-424. ⟨10.1016/j.surfcoat.2017.01.008⟩
Journal articles hal-01662699v1
Image document

Characterization of the mechanical properties of thermal barrier coatings by 3 points bending tests and modified small punch tests

Pierre Planques , Vanessa Vidal , Philippe Lours , Vincent Proton , Fabrice Crabos
Surface and Coatings Technology, 2017, 332, p.40-46. ⟨10.1016/j.surfcoat.2017.09.070⟩
Journal articles hal-01656551v1
Image document

Novel erbia-yttria co-doped zirconia fluorescent thermal history sensor

Etienne Copin , X. Massol , Stéphane Amiel , Thierry Sentenac , Yannick Le Maoult
Smart Materials and Structures, 2017, 26 (1), art. 015001-11 p. ⟨10.1088/0964-1726/26/1/015001⟩
Journal articles hal-01620035v1
Image document

Influence of isothermal and cyclic oxidation on the apparent interfacial toughness in thermal barrier coating systems

Y. Liu , Vanessa Vidal , Sabine Le Roux , Fabien Blas , Florence Ansart
Journal of the European Ceramic Society, 2015, 35 (15), p. 4269-4275. ⟨10.1016/j.jeurceramsoc.2015.07.018⟩
Journal articles hal-01611001v1
Image document

Quantitative assessment of the interfacial roughness in multi-layered materials using image analysis: Application to oxidation in ceramic-based materials

Sabine Le Roux , Frédéric Deschaux-Beaume , Thierry Cutard , Philippe Lours
Journal of the European Ceramic Society, 2015, 35 (3), pp.1063-1079. ⟨10.1016/j.jeurceramsoc.2014.09.027⟩
Journal articles hal-01290215v1
Image document

Optimized sol–gel thermal barrier coatings for long-term cyclic oxidation life

Lisa Pin , Vanessa Vidal , Fabien Blas , Florence Ansart , Sandrine Duluard
Journal of the European Ceramic Society, 2014, vol. 34 (n° 4), pp. 961-974. ⟨10.1016/j.jeurceramsoc.2013.10.013⟩
Journal articles hal-01179395v1
Image document

Feasibility of luminescent multilayer sol-gel thermal barrier coating manufacturing for future applications in through-thickness temperature gradient sensing

Etienne Copin , Thierry Sentenac , Yannick Le Maoult , Fabien Blas , Florence Ansart
Surface and Coatings Technology, 2014, vol. 260, pp. 90-96. ⟨10.1016/j.surfcoat.2014.08.077⟩
Journal articles hal-01168182v1
Image document

Characterisation of thermal barrier sensor coatings synthesised by sol–gel route

Lisa Pin , Christopher Pilgrim , Jörg Feist , Yannick Le Maoult , Florence Ansart
Sensors and Actuators A: Physical , 2013, vol. 199, pp. 289-296. ⟨10.1016/j.sna.2013.03.022⟩
Journal articles hal-01169876v1
Image document

Reinforced sol-gel thermal barrier coatings and their cyclic oxidation life

Lisa Pin , Florence Ansart , Jean-Pierre Bonino , Yannick Le Maoult , Vanessa Vidal
Journal of the European Ceramic Society, 2013, vol. 33, pp. 269-276. ⟨10.1016/j.jeurceramsoc.2012.07.037⟩
Journal articles hal-00836837v1
Image document

Analysis of weld-cracking and improvement of the weld-repair process of superplastic forming tools

Arnaud Duchosal , Frédéric Deschaux-Beaume , Philippe Lours , Sergio Haro , Gilles Fras
Materials & Design, 2013, 46, pp.731-739. ⟨10.1016/j.matdes.2012.11.003⟩
Journal articles hal-00798986v1
Image document

Superplastic forming of AZ31 magnesium alloy with controlled microstructure

M. Cusick , F. Abu-Farha , Philippe Lours , Yannick Le Maoult , Gérard Bernhart
Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 2012, 43 (9, SI), pp.810-816. ⟨10.1002/mawe.201200035⟩
Journal articles hal-01687326v1
Image document

Processing, repairing and cyclic oxidation behaviour of sol-gel thermal barrier coatings

Lisa Pin , Florence Ansart , Jean-Pierre Bonino , Yannick Le Maoult , Vanessa Vidal
Surface and Coatings Technology, 2011, vol. 206, pp. 1609-1614. ⟨10.1016/j.surfcoat.2011.06.043⟩
Journal articles hal-00862288v1
Image document

Buckling and spalling failure of alumina grown by oxidation on ODS FeCrAl alloys

Julien Sniezewski , Philippe Lours , Yannick Le Maoult
Materials at High Temperatures, 2011, 28 (1), pp.17-20. ⟨10.3184/096034011X12962385894289⟩
Journal articles hal-01709490v1
Image document

Oxidation and spallation of FeCrAl alloys and thermal barrier coatings: in situ investigation under controlled temperature gradient

Julien Sniezewski , Yannick Le Maoult , Philippe Lours
Materials at High Temperatures, 2010, 27 (2), pp.101-108. ⟨10.3184/096034010X12710823807053⟩
Journal articles hal-01709494v1
Image document

Advances in the field of new smart thermal barrier coatings

Lisa Pin , Florence Ansart , Justine Fenech , Philippe Lours , Jean Pierre Bonino
Advances in Science and Technology, 2010, 66, p.136-141. ⟨10.4028/www.scientific.net/AST.66.136⟩
Journal articles hal-01851418v1
Image document

Sol–gel thermal barrier coatings: Optimization of the manufacturing route and durability under cyclic oxidation

Julien Sniezewski , Yannick Le Maoult , Philippe Lours , Lisa Pin , Vincent Menvie Bekale
Surface and Coatings Technology, 2010, vol. 205 (n° 5), pp. 1256-1261. ⟨10.1016/j.surfcoat.2010.10.036⟩
Journal articles hal-01688597v1

Spallation Behavior of Thermally Grown Oxide Ceramic Film under Compressive Stresses

Qi Yuhong , Philippe Lours , Yannick Le Maoult , Zhang Zongbao
Rare Metal Materials and Engineering, 2009, 38 (2), pp.1150-1153
Journal articles hal-01709499v1

A microstructural and low-cyle fatigue investigation of weld-repaired heat-resistant cast steels

Traian Branza , Frederic Deschaux-Beaume , P. Velay , Philippe Lours
Journal of Materials Processing Technology, 2009, 209, pp.944-953. ⟨10.1016/j.jmatprotec.2008.03.002⟩
Journal articles hal-00562397v1
Image document

Thermal barrier coatings adherence and spallation: Interfacial indentation resistance and cyclic oxidation behaviour under thermal gradient

Julien Sniezewski , Vanessa Vidal , Philippe Lours , Yannick Le Maoult
Surface and Coatings Technology, 2009, 204 (6-7), pp.807-811. ⟨10.1016/j.surfcoat.2009.09.062⟩
Journal articles hal-01709501v1
Image document

Study and prevention of cracking during weld-repair of heat-resistant cast steels

Traian Branza , Frederic Deschaux-Beaume , G. Sierra , Philippe Lours
Journal of Materials Processing Technology, 2009, 209, pp.536-547. ⟨10.1016/j.jmatprotec.2008.02.033⟩
Journal articles hal-00562399v1
Image document

Spallation Process of Thermally Grown Oxides by In-Situ CCD Monitoring Technique

Qi Yu-Hong , Philippe Lours , Yannick Le Maoult
Journal of Iron and Steel Research International, 2009, 16 (6), pp.90-94. ⟨10.1016/S1006-706X(10)60034-9⟩
Journal articles hal-01709497v1
Image document

A microstructural and low-cycle fatigue investigation of weld-repaired heat-resistant cast steels

Traian Branza , F. Deschaux-Beaume , Vincent Velay , Philippe Lours
Journal of Materials Processing Technology, 2009, 209 (2), pp.944-953. ⟨10.1016/j.jmatprotec.2008.03.002⟩
Journal articles hal-01703246v1
Image document

Method for predicting risk of cracking during weld repair of heat resistant cast steels

Arnaud Duchosal , Frederic Deschaux-Beaume , Cyril Bordreuil , Gilles Fras , Philippe Lours
Science and Technology of Welding and Joining, 2008, 13, pp.126-135. ⟨10.1179/174329308X283839⟩
Journal articles hal-00562411v1
Image document

Evolution of microstructure and impact-strength energy in thermally and thermomechanically aged 15-5 PH

Emilie Herny , Philippe Lours , Eric Andrieu , Jean-Marc Cloué , Philippe Lagain
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2008, vol. 222 (n° 4), pp.299-304
Journal articles hal-01688569v1
Image document

Direct obervations and analysis of the spallation of alumina scales grown on PM2000 alloy

Philippe Lours , Julien Sniezewski , Yannick Le Maoult , Bernard Pieraggi
Materials Science and Engineering: A, 2008, 480 (n°1-2), p.40-48. ⟨10.1016/j.msea.2007.06.081⟩
Journal articles hal-01851424v1
Image document

Thermomechanical stress analysis of superplastic forming tool

Cy Gao , Philippe Lours , Gérard Bernhart
Journal of Materials Processing Technology, 2005, 169 (2), pp.281-291. ⟨10.1016/j.jmatprotec.2005.03.029⟩
Journal articles hal-01716113v1

Investigation of adhesion and fracture toughness of thermally grown oxide scales by interface indentation test

Yuhong Qi , Pascale Bruckel , Philippe Lours , Zhanping Zhang
TRANSACTIONS OF MATERIALS AND HEAT TREATMENT, 2004, 25 (5), p.1233-1236
Journal articles hal-01847816v1
Image document

Quantitative TEM study of the precipitation microstructure in aluminium alloy Al(MgSiCu) 6056 T6

François Delmas , Marie-José Casanove , Philippe Lours , Alain Couret , Armand Coujou
Materials Science and Engineering: A, 2004, 373 (1-2), pp.80-89. ⟨10.1016/j.msea.2003.12.068⟩
Journal articles hal-01716116v1
Image document

Experimental and numerical investigation of the weld repair of superplastic forming dies

Traian Branza , Arnaud Duchosal , Gilles Fras , Frédéric Deschaux-Beaume , Philippe Lours
Journal of Materials Processing Technology, 2004, 155 (2, SI), pp.1673-1680. ⟨10.1016/j.jmatprotec.2004.04.388⟩
Journal articles hal-01716118v1
Image document

Straining mechanisms in aluminium alloy 6056. In-situ investigation by transmission electron microscopy

François Delmas , Marie Vivas , Philippe Lours , Marie-José Casanove , Alain Couret
Materials Science and Engineering: A, 2003, 340 (1-2), pp.286-291. ⟨10.1016/S0921-5093(02)00184-3⟩
Journal articles hal-01716122v1
Image document

In situ ESEM investigations of the oxide growth on hot work tools steel: effect of the water vapour

Pascale Bruckel , Philippe Lours , Pascal Lamesle , Bernard Pieraggi
Materials at High Temperatures, 2003, 20 (4), pp.551-560. ⟨10.3184/096034003782750105⟩
Journal articles hal-01716120v1
Image document

Interfacial toughness of the nickel-nickel oxide system

Yuhong Qi , Pascale Bruckel , Philippe Lours
Journal of Materials Science Letters, 2003, 22 (5), pp.371-374. ⟨10.1023/A:1022697110703⟩
Journal articles hal-01716119v1
Image document

Oxidation and oxide spallation of heat resistant cast steels for superplastic forming dies

Stéphane Baleix , Gérard Bernhart , Philippe Lours
Materials Science and Engineering: A, 2002, 327 (2), pp.155-166. ⟨10.1016/S0921-5093(01)01529-5⟩
Journal articles hal-01716123v1

Oxidation behavior of creep resistant oxide-dispersion-strengthened alloy PM2000

Philippe Lours , Sabine Le Roux , Gérard Bernhart
Journal of Advanced Materials, 2001, 33 (2), p. 11-20
Journal articles hal-01847828v1

Performances of metallic and ceramic tools for superplastic forming

Philippe Lours , Thierry Cutard , Gérard Bernhart , Christophe Levaillant
International Journal of Materials and Product Technology, 2001, 2, pp.445-452
Journal articles hal-01714944v1
Image document

Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles

Stéphane Baleix , Sabine Le Roux , Gérard Bernhart , Philippe Lours
Journal of Materials Processing Technology, 2001, 118 (1-3, SI), pp.321-328. ⟨10.1016/S0924-0136(01)00860-3⟩
Journal articles hal-01703129v1

Structural and mechanical properties of a refractory concrete for superplastic forming tools

Thierry Cutard , Emmanuel Cailleux , Philippe Lours , Gérard Bernhart
Industrial Ceramics, 1999, 19 (2), pp.100-102
Journal articles hal-01714947v1
Image document

Oxidation resistance of ODS alloy PM2000 from 880°C to 1400°C

Philippe Lours , Joël Alexis , Gérard Bernhart
Journal of Materials Science Letters, 1998, 17 (13), pp.1089-1093. ⟨10.1023/A:1006675814903⟩
Journal articles hal-01686704v1
Image document

Determination of precipitate strength in aluminium alloy 6056-T6 from transmission electron microscopy in situ straining data

Marie Vivas , Philippe Lours , Christophe Levaillant , Alain Couret , Marie-José Casanove
Philosophical Magazine a, 1997, 76 (5), pp.921-931. ⟨10.1080/01418619708200007⟩
Journal articles hal-01701682v1
Image document

Transmission electron microscopy study of precipitate morphology and precipitate overcoming processes in aluminum alloy 6056 T6

Marie Vivas , Philippe Lours , Christophe Levaillant , Alain Couret , Marie-José Casanove
Materials Science and Engineering: A, 1997, 234, pp.664-667. ⟨10.1016/S0921-5093(97)00274-8⟩
Journal articles hal-01701684v1
Image document

Microstructure and Mechanical Properties of Hybrid LPBF-DED Inconel 625

Noémie Martin , Anis Hor , Etienne Copin , Philippe Lours , Léon Ratsifandrihana
AIAM'2023 - Advances In Additive Manufacturing, May 2023, Hammamet (Tunisie), Tunisia. pp.10-18, ⟨10.1007/978-3-031-47784-3_2⟩
Conference papers hal-04274828v1
Image document

Marqueur photoluminescent pour le diagnostic de l'histoire thermique à haute température

Etienne Copin , Stéphane Amiel , Thierry Sentenac , Yannick Le Maoult , Philippe Lours
Optique Toulouse 2018 - Congrès de la société française d'optique, Jul 2018, Toulouse, France
Conference papers hal-02416479v1

Mechanical properties of yttria-stabilised-zirconia for thermal barrier coating systems : effects of testing procedure and thermal aging

Pierre Planques , Vanessa Vidal , Philippe Lours , Vincent Proton , Fabrice Crabos
ITSC 2017 - International Thermal Spray Conference and Exposition, ASM, Jun 2017, Dusseldorf, Germany. p.302-307
Conference papers hal-01818493v1

Caractérisation de marqueurs photoluminescents de l'histoire thermique

Stéphane Amiel , Etienne Copin , Thierry Sentenac , Yannick Le Maoult , Philippe Lours
SFT 2016 - Congrès annuel de la Société Française de Thermique, May 2016, Toulouse, France. 8 p
Conference papers hal-01719541v1

Comparison of IR thermography and photoluminescence for early diagnostic of spallation and temperature sensing in thermal barrier coatings

Etienne Copin , Yannick Le Maoult , Thierry Sentenac , Fabien Blas , Thi Hoai Giang Tran
12th International conference on Quantitative Infrared Thermography, Jul 2014, Bordeaux, France. 9 p., ⟨10.21611/qirt.2014.083⟩
Conference papers hal-01708933v1

Microstructural control of new generation thermal barrier coatings via a sol-gel route : cyclic oxidation behaviour

F. Blas , Florence Ansart , Philippe Lours , J.-P. Bonino , S. Duluard
Thermal Barrier Coatings IV - An ECI Conference Series - Irsee - Germany - June 2014, 2014, Irsee, Germany
Conference papers hal-02054337v1

Feasibility of multilayer sol-­gel thermal barrier coating manufacturing for through thickness temperature gradient sensing

Etienne Copin , Thierry Sentenac , Yannick Le Maoult , F. Blas , Florence Ansart
41st International Conference on Metallurgical Coatings and Thin Films 2014 (ICMCTF), 27 Avril – 2 Mai 2014, San Diego (USA), 2014, San Diego, United States
Conference papers hal-02053451v1

Nouvelle technique de caractérisation physico-chimique des alliages à durcissement structural

C. Bellot , F. Taina , E. Cabrol , C. Carniel , P. Lamesle
Journées d'Automne de la SF2M, 2012, Paris, France
Conference papers hal-02187241v1

Experimental Study of the Deformation Mechanisms in Textured Alpha-titanium Alloy Sheets

Vanessa Vidal , Yannick Balcaen , Florence Pettinari-Sturmel , Joël Douin , Philippe Lours
Ti 2011 - 12th World conference on titanium, Jun 2011, Beijing, China. pp.1290-1293
Conference papers hal-01703241v1

Accurate strain analysis of Titanium sheet in single point incremental forming process by digital image correlation

Y. Balcaen , L. Robert , Vincent Velay , Vanessa Vidal , Philippe Lours
Photomechanics 2011, Brussels, Belgium, february, 2011, Brussels, Belgium
Conference papers hal-02191656v1

Comparative Study, in Pure Titanium Sheet, of the Microstructural Evolution Induced by Incremental Forming Process and Plane Strain Tensile Tests

Yannick Balcaen , Vanessa Vidal , Vincent Velay , Laurent Robert , Philippe Lours
Ti 2011 - 12th World conference on titanium, Jun 2011, Beijing, China. pp.1148-1151
Conference papers hal-01703240v1
Image document

Influence of heat treatment on the fracture toughness and crack propagation in 5% Cr martensitic steel

Inès Souki , Denis Delagnes , Philippe Lours
ICM 11 - 11th International conference on the mechanical behavior of materials, Jun 2011, Como, Italy. pp.631-637, ⟨10.1016/j.proeng.2011.04.105⟩
Conference papers hal-01715077v1
Image document

Effect of the LCF loading cycle characteristics on the fatigue life of inconel 718 at high temperature

Fabio Taina , Marco Pasqualon , Vincent Velay , Denis Delagnes , Philippe Lours
7th International symposium on superalloy 718 and derivatives, Oct 2010, Pittsburgh, United States. p.893-905
Conference papers hal-01760282v1

Influence du traitement thermique sur la ténacité et la propagation de fissures pour l'acier à 5% Cr

Inès Souki , Denis Delagnes , Philippe Lours
Matériaux 2010, Oct 2010, Nantes, France. 13 p
Conference papers hal-01771343v1

Caractérisation du comportement en oxydation cyclique de barrières thermiques élaborées par voie sol-gel

Lisa Pin , Florence Ansart , Philippe Lours , Julien Sniezewski , Justine Fenech
Matériaux 2010, Oct 2010, Nantes, France. 6 p
Conference papers hal-01771346v1

In situ and ex situ investigation of thermal barrier coating adherence and spallation

J. Sniezewski , Vanessa Vidal , Yannick Le Maoult , Philippe Lours
EUROCORR 2009 – The European Corrosion Congress - EFC Event n°310 - Nice, France, September 2009, 2009, Nice, France
Conference papers hal-02194627v1
Image document

Heat Resistant Ni-Cr-Fe Steels for Superplastic Forming Dies: From Material Microstructure to Die Design

Gérard Bernhart , Vincent Velay , Philippe Lours
ICSAM 2009 - 10th International Conference on Superplasticity in Advanced Materials, Jun 2009, Seattle, United States. pp.77-84, ⟨10.4028/www.scientific.net/KEM.433.77⟩
Conference papers hal-01703242v1
Image document

In situ thermal gradient controlled investigation of spallation - Experimental design and preliminary results

Julien Sniezewski , Yannick Le Maoult , Philippe Lours
HTCPM 2008 -7th International Symposium on High Temperature Corrosion and Protection of Materials, May 2008, Les Embiez, France. p.1135-1143, ⟨10.4028/www.scientific.net/MSF.595-598.1135⟩
Conference papers hal-01851423v1

Weld-repair of heat resistant cast steels for SFP dies

Philippe Lours , Traian Branza , Frederic Deschaux-Beaume
6th European Conference on superplastic forming Euro SFP08, 2008, Carcassonne, France
Conference papers hal-00562401v1
Image document

TOWARDS SUPERPLASTIC FORMING OF AZ31 MAGNESIUM ALLOY WITH CONTROLLED MICROSTRUCTURE

M. Cusick , F. Abu-Farha , Philippe Lours , Yannick Le Maoult , Gérard Bernhart
EuroSPF 2008, Sep 2008, Carcassonne, France
Conference papers hal-00339195v1

Vieillissement d'un dépôt d'alliage de type Stelitte F durant des recuits à haute température

Abdelaziz Sellidj , Soltane Lebaili , Philippe Lours
JP 2007 -26èmes Journées de printemps, May 2007, Paris, France. p.231-238
Conference papers hal-01771388v1

Etude in-situ de l'écaillage des couches d'oxydes de l'alliage PM 2000

Julien Sniezewski , Philippe Lours , Yannick Le Maoult
Matériaux 2006, Nov 2006, Dijon, France. 10 p
Conference papers hal-01798895v1

In situ and ex situ investigation of the spallation of thermally grown oxides

Philippe Lours , Yuhong Qi , Yannick Le Maoult , Bernard Pieraggi
THERMEC 2006 - 5th International conference on processing & manufacturing of advanced materials, Jul 2006, Vancouver, Canada. pp.1134+, ⟨10.4028/www.scientific.net/MSF.539-543.1134⟩
Conference papers hal-01709506v1

Evolution of the mechanical properties of two precipitation hardening stainless steels after ageing at 400°C comparison between 15-5PH and 13-8PH

Emilie Herny , M. C. Lafont , Eric Andrieu , Philippe Lours , Philippe Lagain
3rd Conference on uses of steel, Nov 2006, Buenos Aires, Argentina. p.201-210
Conference papers hal-01796825v1

Local mechanical and microstructural characterization of electron beam welded 15-5PH stainless stell

Emilie Herny , Philippe Lours , Jean Marc Cloue , Philippe Lagain , Simon Perusin
Super-High Strength Steels, Nov 2005, Rome, Italy. 11 p
Conference papers hal-01788415v1

Modélisation du comportement des aciers austénitiques pour la simulation numérique du soudage multipasse

Arnaud Duchosal , Traian Branza , Frederic Deschaux-Beaume , Cyril Bordreuil , Philippe Lours
3ème Séminaire de la commission "Simulation Numérique du Soudage" de l'Association Française de Mécanique, 2005, Courbevoie, France
Conference papers hal-00562578v1

In situ investigation of the spallation of oxide scales grown on ODS alloy PM2000

Yannick Le Maoult , Philippe Lours , Bernard Pieraggi
16th International Plansee seminar 2005, May 2005, Reutte, Austria. p.958-972
Conference papers hal-01788417v1

Etude expérimentale et numérique du soudage-rechargement : prévision du risque de fissurations à froid d'un acier austénitique réfractaire

Arnaud Duchosal , Traian Branza , Cyril Bordreuil , Frederic Deschaux-Beaume , Philippe Lours
Séminaire Pluri-Formation ENISE, 2005, Saint Galmier, France
Conference papers hal-00562575v1

Influence of the mechanical properties of filler materials on weld repair quality of SPF tools

Traian Branza , Arnaud Duchosal , Cyril Bordreuil , Frederic Deschaux-Beaume , Philippe Lours
4th European Conference on Superplastic Forming Euro SFP05, 2005, Manchester, United Kingdom. pp.121-126
Conference papers hal-00562566v1

Influence of the welding processing on weld repair quality of SPF tools

Traian Branza , Arnaud Duchosal , Cyril Bordreuil , Frédéric Deschaux Beaume , Gilles Fras
Euro SPF'05 -4th European Conference on Superplastic Forming, Jun 2005, Manchester, United Kingdom. p.121-126
Conference papers hal-01788424v1

Macro-micro transition to model cracking phenomenas during multipasses welding processes

Arnaud Duchosal , Traian Branza , Cyril Bordreuil , Frédéric Deschaux Beaume , Philippe Lours
COMPLASS VIII -8th International conference on computational plasticity, Sep 2005, Barcelona, Spain. p.890-893
Conference papers hal-01788419v1

Micro transition to model cracking phenomenas during multipasses welding processes

Arnaud Duchosal , Traian Branza , Cyril Bordreuil , Frederic Deschaux-Beaume , Philippe Lours
8th International conference on computational plasticity COMPLASS VIII, 2005, Barcelona, Spain. pp.890-893
Conference papers hal-00562568v1

Etude dynamique de l'écaillage des oxydes de l'alliage PM2000 : apport d'une nouvelle technique de trajectographie

Yannick Le Maoult , Philippe Lours , Didier Ade , Bernard Pieraggi
Colloque photomécanique 2004, May 2004, Albi, France. pp.369-376
Conference papers hal-01798907v1

Fatigue damage and weld repair of heat resistant cast steel SPF dies

Traian Branza , Alexandre Martinier , Arnaud Duchosal , Frédéric Deschaux Beaume , Gérard Bernhart
Euro-SPF 2004 -3rd European conference on superplastic forming, Jul 2004, Albi, France. p.133-138
Conference papers hal-01796842v1

Preface of the proceedings of Euro SPF 2004 : 3rd european conference on super plastic forming

Gérard Bernhart , Thierry Cutard , Philippe Lours
Euro-SPF 2004 -3rd European conference on superplastic forming, Jul 2004, Albi, France. 1 p
Conference papers hal-01788429v1

Direct examinations of oxide scales upon cooling: a new way to analyse oxide scale spallation

Philippe Lours , Yannick Le Maoult , D Ade , Bernard Pieraggi
6th International Symposium on High Temperature Corrosion and Protection of Materials, May 2004, Les Embiez, France. pp.639-646, ⟨10.4028/www.scientific.net/MSF.461-464.639⟩
Conference papers hal-01709509v1

Isothermal oxidation behaviour of a hot-work tool steel

Pascale Bruckel , Pascal Lamesle , Philippe Lours , Bernard Pieraggi
6th International Symposium on High Temperature Corrosion and Protection of Materials, May 2004, Les Embiez, France. pp.831-838, ⟨10.4028/www.scientific.net/MSF.461-464.831⟩
Conference papers hal-01716117v1

Damages induced by thermomechanical cycles in superplastic forming tools

Cy Gao , Philippe Lours , Gérard Bernhart
7th Asia-Pacific symposium on engineering plasticity and its applications (AEPA2004), Sep 2004, ShangHai, China. pp.93-98, ⟨10.4028/www.scientific.net/KEM.274-276.93⟩
Conference papers hal-01716114v1

Outillage rapide : nouvelle technologie de fabrication rapide par frittage de poudre -analyse technique et scientifique

Huy Vinh Bui , Philippe Lours , Gérard Bernhart , Bruno Le Razer , Philippe Barq
Colloque de la poudre au matériau massif SF2M-GFC -Commission poudres et matériaux frittés Journées annuelles du RFM, Jun 2003, Albi, France. p.359-364
Conference papers hal-01780116v1

Rechargement T.I.G. d'outillages de formage superplastique -essais et simulation

Traian Branza , Gérard Bernhart , Philippe Lours , Frédéric Deschaux Beaume , V. Richefeu
Colloque national MECAMAT, Jan 2003, Aussois, France. 4 p
Conference papers hal-01798910v1

Influence of porosity and anisotropy on the mechanical properties of direct laser sintered metal powder for injection moulding tools

Huy Vinh Bui , Philippe Lours , Gérard Bernhart
4th international conference on industrial tools, Apr 2003, Bled, Slovenia. p.205-208
Conference papers hal-01788437v1

XRD investigations on the oxides grown on hot work tool steels in H2O-containing atmospheres

Pascale Bruckel , Pascal Lamesle , Philippe Lours , Bernard Pieraggi
Electrochemical Society Symposium on High-Temperature Corrosion and Materials Chemistry IV, Apr 2003, Paris, France. pp.135-146
Conference papers hal-01716121v1

Design of SPF dies based on advanced material behaviour models

Gérard Bernhart , F Nazaret , A Martinier , C Gao , D Garriga-Majo
8th International Conference on Superplasticity in Advanced Materials, Mar 2003, Oxford, United Kingdom. pp.123-130, ⟨10.4028/www.scientific.net/MSF.447-448.123⟩
Conference papers hal-01714941v1

Rapid tooling for injection moulding process

Philippe Lours , Hv Bui , A Nafi , O Mercier , Gérard Bernhart
3rd International Symposium on Designing, Processing and Properties of Advanced Engineering Materials, ISAEM-2003, Nov 2003, Jeju Island, South Korea. pp.789-792, ⟨10.4028/www.scientific.net/MSF.449-452.789⟩
Conference papers hal-01716115v1

Investigation of the spallation of oxides grown on thermally cycled heat resistant cast steels

Stéphane Baleix , Gérard Bernhart , Philippe Lours
5th International Symposium on High Temperature Corrosion and Protection of Materials, May 2000, Les Embiez, France. pp.539-546, ⟨10.4028/www.scientific.net/MSF.369-372.539⟩
Conference papers hal-01716124v1

Simulation of service life cycle induced thermomechanical stresses in a superplastic forming tool

Stéphane Baleix , Yannick Le Maoult , S. Frenois , Yves Marcel , Philippe Lours
3rd international congress on thermal stresses, Jun 1999, Krakow, Poland. p. 317-320
Conference papers hal-01799139v1

Application industrielle de la thermographie infrarouge au comportement des outillages de formage superplastique

Yannick Le Maoult , Stéphane Baleix , Philippe Lours , Gérard Bernhart
Journées GAMI du CETIM Les applications de la thermographie dans les industries mécaniques, Jun 1999, Senlis, France. 9 p
Conference papers hal-01799206v1

Effet de la thermique transitoire sur l'endommagement des outillages dans les procédès de formage

Gérard Bernhart , Philippe Lours , Farhad Rezai-Aria , Christophe Levaillant
Journée de la société française des thermiciens, Jan 1999, Paris, France. 8 p
Conference papers hal-01799204v1

High Temperature Mechanical behaviour of Ni-Cr-Fe heat resistant cast steel

Stéphane Baleix , Philippe Lours , Gérard Bernhart
Eight international conference on mechanical behaviour of materials ICM 8, May 1999, Victoria, Canada. pp.653-657
Conference papers hal-01701677v1

Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles

Stéphane Baleix , Sabine Le Roux , Gérard Bernhart , Philippe Lours
AMPT'99 -Advances in Materials and Processing Technologies, Aug 1999, Dublin, Iran. p. 1175-1184
Conference papers hal-01799149v1

On the strengthening of aluminium alloy 6056T6

Marie Vivas , Philippe Lours , Christophe Levaillant , Marie-José Casanove , Alain Couret
6th international conference on aluminum alloys ICAA6, Jul 1998, Toyohashi, Japan. p.943-948
Conference papers hal-01799151v1

High temperature oxidation behaviour and creep properties of ods alloy PM2000

Philippe Lours , Joël Alexis , Gérard Bernhart
14th international plansee seminar, May 1997, Reutte, Austria. p.869-886
Conference papers hal-01799155v1

A microscopy study of precipitate distribution and precipitate overcoming processes in a aluminium alloy 6056 T6

Marie Vivas , Philippe Lours , Christophe Levaillant , Alain Couret , Marie-José Casanove
11th international conference on the strenght of metals and alloys ICSMA 11, Aug 1997, Prague, Czech Republic. 2p
Conference papers hal-01799152v1

Some aspects of precipitation hardening in aluminum alloy 6056 T6 - TEM experiments

Marie Vivas , Philippe Lours , Christophe Levaillant , Alain Couret , Marie-José Casanove
5ème conférence internationale sur les alliages d'aluminium, Jul 1996, Grenoble, France. pp.1305-1310, ⟨10.4028/www.scientific.net/MSF.217-222.1305⟩
Conference papers hal-01716125v1

Caractérisation de marqueurs de l’histoire thermique photoluminescents

Amiel Stéphane , Etienne Copin , Thierry Sentenac , Yannick Le Maoult , Philippe Lours
Congrès Français de Thermique 2016, 31 Mai – 3 Juin 2016, Toulouse, 2016, Toulouse, France
Conference poster hal-02057539v1

Fonctionnalisation de barrières thermiques sol-gel YSZ pour la mesure de température et le CND par fluorescence

Etienne Copin , Thierry Sentenac , Yannick Le Maoult , Philippe Lours
6e colloque de l’Institut Mines-Télécom « Matériaux : réalités et nouvelles frontières», 30-31 Mars 2016, Paris, 2016, Paris, France
Conference poster hal-02057593v1

Étude des mécanismes de déformation en formage incrémental

Y. Balcaen , N. Decultot , Vanessa Vidal , Vincent Velay , L. Robert
Colloque Plasticité 2010, 2010, Toulouse, France. 2010
Conference poster hal-02193785v1

Au coeur des matériaux cristallins

Philippe Lours
Transvalor - Presses des Mines, 217 p., 2016, Sciences de la matière, 978-2-35671-370-4
Books hal-01725424v1

Processes and equipment for superplastic forming of metals

Gérard Bernhart , Philippe Lours , Thierry Cutard , Vincent Velay , Fabien Nazaret
Extrait de : Superplastic forming of advanced metallic materials : methods and applications (chap. 3) / sous la dir. de G. GIULIANO, Woodhead Publishing, p.49-71, 2011, 978-1-84569-753-2. ⟨10.1533/9780857092779.1.49⟩
Book sections hal-01729123v1