Sandrine Thuillier

Professeur des universités
160
Documents
Affiliations actuelles
  • Institut de Recherche Dupuy de Lôme (IRDL)
  • Université de Bretagne Sud (UBS)
Contact

Présentation

Sandrine Thuillier est professeur des universités en mécanique depuis 2009 à l'Université Bretagne Sud (France). Ses activités de recherche portent sur la caractérisation expérimentale du comportement mécanique des matériaux à température ambiante et élevée, principalement des tôles d'alliages d'aluminium, d'aciers et d'alliages de titane, et dans une moindre mesure, des élastomères et des composites thermoplastiques. Elle concentre également ses efforts sur l'identification des paramètres des matériaux par méthode inverse, car ces paramètres sont une donnée d'entrée essentielle pour les modèles numériques fondés sur l'élasto-visco-plasticité, la limite d'élasticité anisotrope, l'endommagement ductile et la rupture macroscopique. Enfin, elle applique ses compétences scientifiques aux processus de mise en forme des métaux, tels que l'emboutissage, les défauts de surface, la flexion, la torsion et l'assemblage par déformation plastique, comme le sertissage et le clinchage.

Depuis 2022, elle est directrice de l'école doctorale SPI.bzh n°647

Depuis décembre 2023, elle est présidente de la section CNU60 (Conseil National des Universités),

Publications

80
21
21
13
7
7
4
2
2
1
1
1
6
4
4
4
4
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
53
14
12
10
10
9
9
9
8
7
7
6
6
6
6
5
5
5
4
4
4
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
65
87
18
2
6

Publications

Deposit thumbnail

Inverse identification of the hardening behavior with a fully 3D virtual fields method

Miguel G Oliveira , Sandrine Thuillier , António Andrade-Campos

Advanced Modeling and Simulation in Engineering Sciences, 2025, 12 (1), pp.10. ⟨10.1186/s40323-025-00293-7⟩

Article dans une revue hal-05050227v1
Deposit thumbnail

Assessing the Potential of Heterogeneous Mechanical Tests for Sheet Metals Through Experimentally Measured Full-Fields

M. Gonçalves , Sandrine Thuillier , A. Andrade-Campos

Experimental Mechanics, 2025, ⟨10.1007/s11340-025-01168-z⟩

Article dans une revue hal-05000081v1
Deposit thumbnail

From single to multi-stage forming process of copper thin sheet

Amine Lagroum , Pierre-Yves Manach , Sandrine Thuillier

Mechanics & Industry, 2025, 26, ⟨10.1051/meca/2024039⟩

Article dans une revue hal-04915621v1

Towards a Digital Virtual Twin for Heterogeneous Thermomechanical Experiments

Alessandro Lambrughi , Sandrine Thuillier , Sam Coppieters

Strain, 2025, 61 (6), ⟨10.1111/str.70020⟩

Article dans une revue hal-05393756v1

Uncertainties on the mechanical behaviour of bronze sheets: influence on the failure in bending

Ghinwa Ouaidat , Amine Lagroum , Ahmed Kacem , Sandrine Thuillier

International Journal of Material Forming, 2024, 17 (3), pp.29. ⟨10.1007/s12289-024-01831-1⟩

Article dans une revue hal-04693354v1
Deposit thumbnail

Integrated model calibration for anisotropy, hardening and rupture - Application to the clinching process

Abhishek Kumar , Ahmed Kacem , Sandrine Thuillier

Procedia Structural Integrity, 2024, 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF 2023), Istanbul, October 2023, 61, pp.62-70. ⟨10.1016/j.prostr.2024.06.010⟩

Article dans une revue hal-04663502v1

Key performance indicators for heterogeneous mechanical tests

M. Gonçalves , M.G. Oliveira , S. Thuillier , A. Andrade-Campos

International Journal of Mechanical Sciences, 2024, 264, pp.108821. ⟨10.1016/j.ijmecsci.2023.108821⟩

Article dans une revue hal-04692040v1
Deposit thumbnail

Numerical Analysis on the Spatiotemporal Characteristics of the Portevin-Le Chatelier Effect in Ti-12Mo Alloy

Shiyuan Luo , Yongxin Jiang , Sandrine Thuillier , Philippe Castany , Liangcai Zeng

Metals and Materials International, 2023, 29 (2), pp.269-279. ⟨10.1007/s12540-022-01226-4⟩

Article dans une revue hal-03694398v1
Deposit thumbnail

On the use of the Gleeble® test as a heterogeneous test: sensitivity analysis on temperature, strain and strain rate

Bernardete Coelho , Sandrine Thuillier

IOP Conference Series: Materials Science and Engineering, 2022, 1238, ⟨10.1088/1757-899x/1238/1/012058⟩

Article dans une revue hal-03774221v1

Testing methodologies for the calibration of advanced plasticity models for sheet metals: A review

Marco Rossi , Attilio Lattanzi , Luca Morichelli , João Martins , Sandrine Thuillier et al.

Strain, 2022, 58 (6), ⟨10.1111/str.12426⟩

Article dans une revue hal-04693378v1
Deposit thumbnail

Experimental and numerical investigation of ductile fracture for AA6061-T6 sheets at room and elevated temperatures

Ahmed Kacem , Hervé Laurent , Sandrine Thuillier

International Journal of Mechanical Sciences, 2022, 222, pp.107201. ⟨10.1016/j.ijmecsci.2022.107201⟩

Article dans une revue hal-04649904v1
Deposit thumbnail

Relevant material characterization for load prediction in incremental forming

A. Abdelkefi , Dominique Guines , Lionel Leotoing , S. Thuillier

International Journal of Material Forming, 2022, 15 (3), pp.23. ⟨10.1007/s12289-022-01676-6⟩

Article dans une revue hal-03631021v1
Deposit thumbnail

Quality of the strain state in simple shear testing using field measurement techniques

Baptiste Reyne , Diane Hérault , Sandrine Thuillier , Pierre-Yves Manach

International Journal of Mechanical Sciences, 2021, 208, pp.106660. ⟨10.1016/j.ijmecsci.2021.106660⟩

Article dans une revue hal-04693465v1

Incremental forming of friction-stir welded aluminium blanks: an integrated approach

P. Carlone , S. Thuillier , A. Andrade-Campos , R. de Sousa , R. Valente

International Journal of Material Forming, 2021, 14 (5), pp.1121-1137. ⟨10.1007/s12289-021-01628-6⟩

Article dans une revue hal-04693475v1
Deposit thumbnail

Influence of experimental boundary conditions on the calibration of a ductile fracture criterion

Ahmed Kacem , Hervé Laurent , Sandrine Thuillier

Engineering Fracture Mechanics, 2021, 248, pp.107686. ⟨10.1016/j.engfracmech.2021.107686⟩

Article dans une revue hal-04649896v1
Deposit thumbnail

Calibration of a strain path change model for a dual phase steel

Diane Hérault , Sandrine Thuillier , Shin-Yeong Lee , Pierre-Yves Manach , Frédéric Barlat

International Journal of Mechanical Sciences, 2021, 194, pp.106217 -. ⟨10.1016/j.ijmecsci.2020.106217⟩

Article dans une revue hal-03493965v1

Mechanical properties of solution heat treated Al-Zn-Mg-Cu (7075) alloy under different cooling conditions: Analysis with full field measurement and finite element modeling

Chanmi Moon , Sandrine Thuillier , Jinwoo Lee , Myoung-Gyu Lee

Journal of Alloys and Compounds, 2021, 856, pp.158180. ⟨10.1016/j.jallcom.2020.158180⟩

Article dans une revue hal-04693440v1
Deposit thumbnail

Calibration of a modified Johnson-Cook model using the Virtual Fields Method and a heterogeneous thermo-mechanical tensile test

J.M.P. Martins , S. Thuillier , A. Andrade-Campos

International Journal of Mechanical Sciences, 2021, 202-203, pp.106511. ⟨10.1016/j.ijmecsci.2021.106511⟩

Article dans une revue hal-04693452v1

Evaluation of heterogeneous mechanical tests for model calibration of sheet metals

Miguel Oliveira , Sandrine Thuillier , António Andrade-Campos

Journal of Strain Analysis for Engineering Design, 2021, 57 (3), pp.208-224. ⟨10.1177/03093247211027061⟩

Article dans une revue hal-04693387v1

Prediction of coupled 2D and 3D effects in springback of copper alloys after deep drawing

G.X. Ha , M. Oliveira , A. Andrade-Campos , P.Y. Manach , S. Thuillier

International Journal of Material Forming, 2021, 14 (5), pp.1171-1187. ⟨10.1007/s12289-021-01631-x⟩

Article dans une revue hal-04693480v1
Deposit thumbnail

Prediction of elastic anisotropic thermo-dependent properties of discontinuous fiber-reinforced composites

D Lopez , Sandrine Thuillier , Y. Grohens

Journal of Composite Materials, 2020, ⟨10.1177/0021998319889397⟩

Article dans une revue hal-02478136v1

Investigation of the key process parameters in the hot forming of a shackle

J. Cochet , S. Thuillier , N. Decultot , P. Manach

International Journal of Advanced Manufacturing Technology, 2019, 105 (7-8), pp.3209-3219. ⟨10.1007/s00170-019-04451-1⟩

Article dans une revue hal-04693632v1
Deposit thumbnail

Calibration of anisotropic plasticity models using a biaxial test and the virtual fields method

J.M.P. Martins , A. Andrade-Campos , S. Thuillier

International Journal of Solids and Structures, 2019, 172, pp.21 - 37. ⟨10.1016/j.ijsolstr.2019.05.019⟩

Article dans une revue hal-03485827v1

Dynamical properties of flax fibre reinforced PA11 over a large frequency range

Federico Amenini , Julien Brocail , Michael Chauvin , Sandrine Thuillier

Composites Science and Technology, 2019, 171, pp.234-243. ⟨10.1016/j.compscitech.2018.12.026⟩

Article dans une revue istex hal-04477405v1

Design of heterogeneous mechanical tests: Numerical methodology and experimental validation

José Aquino , A. Gil Andrade-Campos , João Martins , Sandrine Thuillier

Strain, 2019, 55 (4), ⟨10.1111/str.12313⟩

Article dans une revue hal-04693611v1
Deposit thumbnail

Microstructure, thermo-mechanical properties and Portevin-Le Chatelier effect in metastable β Ti-xMo alloys

S. Luo , P. Castany , S. Thuillier

Materials Science and Engineering: A, 2019, 756, pp.61-70. ⟨10.1016/j.msea.2019.04.018⟩

Article dans une revue hal-02122158v1

Investigation of Portevin-Le Châtelier effect during Erichsen test

L. Mansouri , J. Coër , S. Thuillier , H. Laurent , P. Manach

International Journal of Material Forming, 2019, 13 (5), pp.687-697. ⟨10.1007/s12289-019-01511-5⟩

Article dans une revue hal-04693552v1

Comparison of inverse identification strategies for constitutive mechanical models using full-field measurements

J. M. P. Martins , A. Andrade-Campos , S. Thuillier

International Journal of Mechanical Sciences, 2018, 145, pp.330-345. ⟨10.1016/j.ijmecsci.2018.07.013⟩

Article dans une revue hal-02069343v1
Deposit thumbnail

Modeling Bake Hardening Effects in Steel Sheets-Application to Dent Resistance

Sandrine Thuillier , Shun-Lai Zang , Julien Troufflard , P. Y. Manach , Anthony Jegat

Metals, 2018, 8 (8), pp.6137. ⟨10.3390/met8080594⟩

Article dans une revue hal-02069291v1
Deposit thumbnail

Spatiotemporal characteristics of Portevin-Le Chatelier effect in Ti-Mo alloys under thermo-mechanical loading

S. Luo , P. Castany , S. Thuillier , M. Huot

Materials Science and Engineering: A, 2018, 733, pp.137-143. ⟨10.1016/j.msea.2018.07.022⟩

Article dans une revue hal-01874722v1

Mechanical design of a heterogeneous test for material parameters identification

N. Souto , A. Andrade-Campos , S. Thuillier

International Journal of Material Forming, 2017, 10 (3), pp.353-367. ⟨10.1007/s12289-016-1284-9⟩

Article dans une revue hal-01697257v1

Heat treatment of 34CrNiMo6 steel used for mooring shackles

J. Cochet , S. Thuillier , T. Loulou , Nicolas Decultot , P. Carre et al.

International Journal of Advanced Manufacturing Technology, 2017, 91 (5-8), pp.2329-2346. ⟨10.1007/s00170-016-9951-z⟩

Article dans une revue hal-01697269v1

A numerical methodology to design heterogeneous mechanical tests

N. Souto , A. Andrade-Campos , S. Thuillier

International Journal of Mechanical Sciences, 2016, 107, pp.264-276. ⟨10.1016/j.ijmecsci.2016.01.021⟩

Article dans une revue istex hal-02110772v1

Prediction of failure in bending of an aluminium sheet alloy

A. Pradeau , S. Thuillier , J. W. Yoon

International Journal of Mechanical Sciences, 2016, 119, pp.23-35. ⟨10.1016/j.ijmecsci.2016.09.033⟩

Article dans une revue istex hal-02110743v1

Thermo-mechanical forming of a large sling shackle

P. Y. Manach , N. Decultot , Sandrine Thuillier , Julien Cochet

International Journal of Advanced Manufacturing Technology, 2016, 86 (5-8), pp.1573-1591. ⟨10.1007/s00170-015-8300-y⟩

Article dans une revue hal-04636544v1

Prediction of flow stress and surface roughness of stainless steel sheets considering an inhomogeneous microstructure

Cong Hanh Pham , Sandrine Thuillier , Pierre-Yves Manach

Materials Science and Engineering: A, 2016, 678, pp.377-388. ⟨10.1016/j.msea.2016.09.101⟩

Article dans une revue istex hal-04695318v1

Thermo-mechanical modeling of Portevin-Le Chatelier instabilities under various loading paths

L. Z. Mansouri , S. Thuillier , P. Y. Manach

International Journal of Mechanical Sciences, 2016, 115, pp.676-688. ⟨10.1016/j.ijmecsci.2016.08.001⟩

Article dans une revue istex hal-02110750v1

2D Springback and Twisting of Ultra‐Thin Stainless Steel U‐Shaped Parts

Cong Hanh Pham , Sandrine Thuillier , Pierre‐yves Manach

Steel Research International, 2015, 86 (8), pp.861-868. ⟨10.1002/srin.201400569⟩

Article dans une revue hal-04695360v1

Mechanical Properties Involved in the Micro-forming of Ultra-thin Stainless Steel Sheets

Cong-Hanh Pham , Sandrine Thuillier , Pierre-Yves Manach

Metallurgical and Materials Transactions A, 2015, 46 (8), pp.3502-3515. ⟨10.1007/s11661-015-2978-1⟩

Article dans une revue hal-04695358v1

Material parameter identification within an integrated methodology considering anisotropy, hardening and rupture

N. Souto , A. Andrade-Campos , S. Thuillier

Journal of Materials Processing Technology, 2015, 220, pp.157-172. ⟨10.1016/j.jmatprotec.2015.01.017⟩

Article dans une revue istex hal-04695350v1
Deposit thumbnail

Design of an indicator to characterize and classify mechanical tests for sheet metals

N. Souto , S. Thuillier , A. Andrade-Campos

International Journal of Mechanical Sciences, 2015, 101-102, pp.252-271. ⟨10.1016/j.ijmecsci.2015.07.026⟩

Article dans une revue (article de synthèse) hal-04263706v1
Deposit thumbnail

Potential of the Cross Biaxial Test for Anisotropy Characterization Based on Heterogeneous Strain Field

Shunying Zhang , Lionel Leotoing , Dominique Guines , Sandrine Thuillier

Experimental Mechanics, 2015, 55 (5), pp.817-835. ⟨10.1007/s11340-014-9983-y⟩

Article dans une revue hal-01151222v1

Investigation of the rupture in tension and bending of DP980 steel sheet

A Mishra , Sandrine Thuillier

International Journal of Mechanical Sciences, 2014, pp.171-181. ⟨10.1016/j.ijmecsci.2014.04.023⟩

Article dans une revue istex hal-01115645v1
Deposit thumbnail

Calibration of anisotropic yield criterion with conventional tests or biaxial test

Shunying Zhang , Lionel Leotoing , Dominique Guines , Sandrine Thuillier , Shun-Lai Zang

International Journal of Mechanical Sciences, 2014, 85, pp.142-151. ⟨10.1016/j.ijmecsci.2014.05.020⟩

Article dans une revue hal-01005604v1

Twisting analysis of ultra-thin metallic sheets

C.H. Pham , Sandrine Thuillier , Pierre-Yves Manach

Journal of Materials Processing Technology, 2014, 214 (4), pp.844-855. ⟨10.1016/j.jmatprotec.2013.12.006⟩

Article dans une revue istex hal-00986854v1

Kinematics of Portevin–Le Chatelier bands in simple shear

P.Y. Manach , Sandrine Thuillier , J.W. Yoon , J. Coër , H. Laurent

International Journal of Plasticity, 2014, 58, pp.66-83. ⟨10.1016/j.ijplas.2014.02.005⟩

Article dans une revue istex hal-01099846v1

On the use of cyclic shear, bending and uniaxial tension–compression tests to reproduce the cyclic response of sheet metals

Abbas Ghaei , Daniel Green , Sandrine Thuillier , Fabrice Morestin

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014, 229 (3), pp.453-462. ⟨10.1177/0954405414529122⟩

Article dans une revue hal-04695457v1

Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomography

G. Requena , Éric Maire , Claire Leguen , Sandrine Thuillier

Materials Science and Engineering: A, 2014, 589, pp.242-251. ⟨10.1016/j.msea.2013.09.084⟩

Article dans une revue istex hal-00985804v1

Influence of a Tensile Pre-Strain on Bending of Aluminium Alloy

Sandrine Thuillier

Key Engineering Materials, 2014, pp.1742-1749. ⟨10.4028/www.scientific.net/KEM.611-612.1742⟩

Article dans une revue hal-01115649v1

On the Development and Computational Implementation of Complex Constitutive Models and Parameters’ Identification Procedures

Tiago Jordão Grilo , Nelson Souto , Robertt Valente , António Andrade-Campos , Sandrine Thuillier et al.

Key Engineering Materials, 2013, 554-557, pp.936-948. ⟨10.4028/www.scientific.net/KEM.554-557.936⟩

Article dans une revue hal-04698669v1

Effect of stress triaxiality on porosity evolution in notched bars: Quantitative agreement between a recent dilatational model and X-ray tomography data

Benoît Revil-Baudard , Oana Cazacu , Sandrine Thuillier , Éric Maire

Mechanics Research Communications, 2013, 50, pp.77-82. ⟨10.1016/j.mechrescom.2013.04.005⟩

Article dans une revue istex hal-00985576v1

Failure prediction in the hole-flanging process of aluminium alloys

A. Kacem , A. Krichen , Pierre-Yves Manach , Sandrine Thuillier , Jeong-Won Yoon

Engineering Fracture Mechanics, 2013, 99, pp.251-265. ⟨10.1016/j.engfracmech.2012.12.018⟩

Article dans une revue istex hal-00985616v1

Shape Optimization of the Conventional Simple Shear Specimen

Nelson Souto , António Andrade-Campos , Sandrine Thuillier

Key Engineering Materials, 2013, 554-557, pp.2156-2164. ⟨10.4028/www.scientific.net/KEM.554-557.2156⟩

Article dans une revue hal-04698689v1
Deposit thumbnail

Influence of prestrain on the numerical simulation of the roller hemming process

Nicolas Le Maoût , Pierre-Yves Manach , Sandrine Thuillier

Journal of Materials Processing Technology, 2012, 212 (2), pp.450-457. ⟨10.1016/j.jmatprotec.2011.10.008⟩

Article dans une revue hal-00715740v1

Investigation of Springback of Metallic Sheets at Small Strains

Pierre-Yves Manach , Sandrine Thuillier

Strain, 2012, Volume 48 (Issue 3), pp.216-224. ⟨10.1111/j.1475-1305.2011.00814.x⟩

Article dans une revue istex hal-00715752v1

Ductile damage in aluminium alloy thin sheets: Correlation between micro-tomography observations and mechanical modeling

Sandrine Thuillier , Eric Maire , Michel Brunet

Materials Science and Engineering: A, 2012, 558, pp.217-225. ⟨10.1016/j.msea.2012.07.116⟩

Article dans une revue istex hal-00987155v1

Prediction of anisotropy and hardening for metallic sheets in tension, simple shear and biaxial tension

S.L. Zang , Sandrine Thuillier , A. Le Port , Pierre-Yves Manach

International Journal of Mechanical Sciences, 2011, Volume 53 (Issue 5), pp.338-347. ⟨10.1016/j.ijmecsci.2011.02.003⟩

Article dans une revue istex hal-00715774v1

A model of one-surface cyclic plasticity and its application to springback prediction

S.L. Zang , C. Guo , Sandrine Thuillier , M.G. Lee

International Journal of Mechanical Sciences, 2011, Volume 53 (Issue 6), pp.425-435. ⟨10.1016/j.ijmecsci.2011.03.005⟩

Article dans une revue istex hal-00715762v1

Influence of ductile damage on the bending behaviour of aluminium alloy thin sheets

Sandrine Thuillier , Nicolas Le Maoût , Pierre-Yves Manach

Materials & Design, 2011, Volume 32 (Issue 4), pp.2049-2057. ⟨10.1016/j.matdes.2010.11.050⟩

Article dans une revue istex hal-00715779v1

The Effect of Temperature on Anisotropy Properties of an Aluminium Alloy

J. Coër , Cédric Bernard , Hervé Laurent , A. Andrade-Campos , Sandrine Thuillier

Experimental Mechanics, 2011, Volume 51 (Number 7), pp.1185-1195. ⟨10.1007/s11340-010-9415-6⟩

Article dans une revue istex hal-00715790v1

Characterization of surface defects after flanging of metallic sheets

A. Le Port , Sandrine Thuillier , Pierre-Yves Manach

Journal of Materials Processing Technology, 2011, Volume 211 (Issue 12), pp.2062-2071. ⟨10.1016/j.jmatprotec.2011.07.004⟩

Article dans une revue istex hal-00715746v1

Drawing, flanging and hemming of metallic thin sheets: A multi-step process

Nicolas Le Maoût , Sandrine Thuillier , Pierre-Yves Manach

Materials & Design, 2010, 31 (6), pp.2725-2736. ⟨10.1016/j.matdes.2010.01.030⟩

Article dans une revue istex hal-00472202v1

Occurrence and numerical prediction of surface defects during flanging of metallic sheets

A. Le Port , S. Thuillier , P.Y. Manach

International Journal of Material Forming, 2010, vol.3 (no.3), pp.215-223. ⟨10.1007/s12289-009-0677-4⟩

Article dans une revue hal-00494394v1

Occurence of strain path changes in a two-stage deep drawing process

Sandrine Thuillier , Pierre-Yves Manach , L.F. Menezes

Journal of Materials Processing Technology, 2010, 210 (2), pp.226-232. ⟨10.1016/j.jmatprotec.2009.09.004⟩

Article dans une revue istex hal-00472195v1

Classical and roll-hemming processes of pre-strained metallic sheets,

Nicolas Le Maoût , S. Thuillier , P.Y. Manach

Experimental Mechanics, 2010, Volume 50 (Number 7), pp.1087-1097. ⟨10.1007/s11340-009-9297-7⟩

Article dans une revue istex hal-00494110v1

Bending Limit Prediction of an Aluminum Thin Sheet

Sandrine Thuillier , Nicolas Le Maoût , Pierre-Yves Manach

International Journal of Material Forming, 2010, Volume 3 (Supplement 1), pp.223-226. ⟨10.1007/s12289-010-0747-7⟩

Article dans une revue hal-00715797v1
Deposit thumbnail

Occurrence and numerical prediction of surface defects during flanging of metallic sheets

Alban Le Port , Sandrine Thuillier , Pierre-Yves Manach

International Journal of Material Forming, 2010, 3 (3), pp.215-223. ⟨10.1007/s12289-009-0677-4⟩

Article dans une revue hal-00494122v1

Comparison of the work-hardening of metallic sheets using tensile and shear strain paths

Sandrine Thuillier , Pierre-Yves Manach

International Journal of Plasticity, 2009, 25 (5), pp.733-751. ⟨10.1016/j.ijplas.2008.07.002⟩

Article dans une revue istex hal-00404007v1

Comparison of the work-hardening of metallic sheets in bending-unbending and simple shear

Jérôme Carbonniere , Sandrine Thuillier , Francis Sabourin , Michel Brunet , Pierre-Yves Manach

International Journal of Mechanical Sciences, 2009, 51 (2), pp.122-130. ⟨10.1016/j.ijmecsci.2008.12.006⟩

Article dans une revue istex hal-00472184v1

Aluminium alloy damage evolution for different strain paths - Application to hemming process

Nicolas Le Maoût , Sandrine Thuillier , Pierre-Yves Manach

Engineering Fracture Mechanics, 2009, 76 (9), pp.1202-1214

Article dans une revue hal-00472197v1
Deposit thumbnail

Influence of constitutive model in springback prediction using the split-ring test

Hervé Laurent , Renaud Grèze , Pierre-Yves Manach , Sandrine Thuillier

International Journal of Mechanical Sciences, 2009, 51 (3), pp 233-245. ⟨10.1016/j.ijmecsci.2008.12.010⟩

Article dans une revue istex hal-00400919v1

Aluminum alloy damage evolution for different strain paths – Application to hemming process

N. Le Maoût , S. Thuillier , P.Y. Manach

Engineering Fracture Mechanics, 2009, 76 (9), pp.1202-1214. ⟨10.1016/j.engfracmech.2009.01.018⟩

Article dans une revue istex hal-04700595v1

Non-linear mechanical behaviour of carbon black reinforced elastomers: experiments and multiscale modelling

B. Omnès , Sandrine Thuillier , Philippe Pilvin , S. Gillet

Plastics, Rubber and Composites, 2008, 37 (5-6), pp.251-257. ⟨10.1179/174328908X309457⟩

Article dans une revue hal-00399981v1

Numerical simulation of the roll hemming process

Sandrine Thuillier , Nicolas Le Maoût , Pierre-Yves Manach , D. Debois

Journal of Materials Processing Technology, 2008, 198, pp.226-233. ⟨10.1016/j.jmatprotec.2007.07.004⟩

Article dans une revue istex hal-00399952v1

Effective properties of carbon black filled natural rubber: Experiments and modeling

B. Omnès , S. Thuillier , P. Pilvin , Y. Grohens , S. Gillet

Composites Part A: Applied Science and Manufacturing, 2008, 39 (7), pp.1141-1149. ⟨10.1016/j.compositesa.2008.04.003⟩

Article dans une revue istex hal-04700328v1

Material parameters identification : Gradient-based, genetic and hybrid optimization algorithms

B.M. Chaparro , Sandrine Thuillier , L.F. Menezes , Pierre-Yves Manach , J.V. Fernandes

Computational Materials Science, 2008, 44 (2), pp.339-346. ⟨10.1016/j.commatsci.2008.03.028⟩

Article dans une revue istex hal-00404004v1

Effective properties of carbon black filled natural rubber: Experiments and modelling

B. Omnès , Sandrine Thuillier , Philippe Pilvin , Yves Grohens , S. Gillet

Composites Part A: Applied Science and Manufacturing, 2008, 39 (7), pp.1141-1149

Article dans une revue hal-00400609v1

Mechanical behavior of a metastable austenitic stainless steel under simple and complex loading paths

S. Gallée , P.Y. Manach , S. Thuillier

Materials Science and Engineering: A, 2007, 466 (1-2), pp.47-55. ⟨10.1016/j.msea.2007.02.054⟩

Article dans une revue istex hal-04700353v1

Mechanical behaviour of a metastable autenitic stainless steel under simple and complex loading paths

S. Gallée , Pierre-Yves Manach , Sandrine Thuillier

Materials Science and Engineering: A, 2007, 466, pp.47-55

Article dans une revue hal-00399965v1

On the determination of material parameters for internal variable thermoelastic-viscoplastic constitutive models

A. Andrade-Campos , Sandrine Thuillier , Philippe Pilvin , F. Texeira-Dias

International Journal of Plasticity, 2007, 23, pp.1349-1379. ⟨10.1016/j.ijplas.2006.09.002⟩

Article dans une revue istex hal-00399969v1

Micro-mechanical model of TPE made of polypropylene and rubber waste

Gilles Ausias , Sandrine Thuillier , B. Omnès , S. Wiessner , Philippe Pilvin

Polymer, 2007, 48 (11), pp.3367-3376. ⟨10.1016/j.polymer.2007.03.049⟩

Article dans une revue istex hal-00399246v1

Numerical Simulation of the Hemming Process in the case of Al Alloys

S. Thuillier

AIP Conference Proceedings, 2005, ⟨10.1063/1.2011303⟩

Article dans une revue hal-04598217v1

Experimental and numerical study of reverse re-drawing of anisotropic sheet metals

S Thuillier , P.Y Manach , L.F Menezes , M.C Oliveira

Journal of Materials Processing Technology, 2002, 125-126, pp.764-771. ⟨10.1016/S0924-0136(02)00387-4⟩

Article dans une revue hal-04700365v1

The Mechanical Behavior of a Slightly Compressible Rubber-Like Material: Correlation of Simulations and Experiments

C. Moreau , S. Thuillier , G. Rio , V. Grolleau

Rubber Chemistry and Technology, 1999, 72 (2), pp.269-282. ⟨10.5254/1.3538800⟩

Article dans une revue hal-04700403v1

Fibre optic sensor for physiological parameters

C. Gagnadre , M. Billon , S. Thuillier

Electronics Letters, 1998, 34 (21), pp.1991. ⟨10.1049/el:19981431⟩

Article dans une revue hal-04700409v1

Micromechanical Model of the Two Way Memory Effect in NiTi Alloys

S. Thuillier , D. Favier , G. Canova

Journal de Physique IV Proceedings, 1995, 05 (C8), pp.C8-587-C8-592. ⟨10.1051/jp4/199558587⟩

Article dans une revue istex hal-04700436v1

Interaction of microbands with grain boundaries in mild steel

S. Thuillier , E.F. Rauch

Scripta Metallurgica et Materialia, 1995, 32 (4), pp.541-546. ⟨10.1016/0956-716X(95)90834-7⟩

Article dans une revue istex hal-04700432v1

Development of microbands in mild steel during cross loading

S. Thuillier , E.F. Rauch

Acta Metallurgica et Materialia, 1994, 42 (6), pp.1973-1983. ⟨10.1016/0956-7151(94)90022-1⟩

Article dans une revue istex hal-04700439v1

Rheological behaviour of mild steel under monotonic loading conditions and cross-loading

E.F. Rauch , S. Thuillier

Materials Science and Engineering: A, 1993, 164 (1-2), pp.255-259. ⟨10.1016/0921-5093(93)90673-3⟩

Article dans une revue istex hal-04700446v1
Deposit thumbnail

Virtual forming based on model calibration from heterogeneous tests

Lisa Germain , Mafalda Gonçalves , Thibault Barret , Antonio Andrade-Campos , S. Thuillier

ESAFORM 2025, May 2025, Paestum, Italy. pp.1568-1576, ⟨10.21741/9781644903599-169⟩

Communication dans un congrès hal-05062344v1
Deposit thumbnail

Towards the digital twin of a multi-stage forming process for metallic sheets

Nivesh Gautam , Tudor Balan , Francisco Chinesta , Sandrine Thuillier

26ème Congrès Français de Mécanique (CFM 2025), AFM - Association Française de Mécanique; LEM3 - Laboratoire d'Étude des Microstructures et de Mécanique des Matériaux (LEM3 - UMR CNRS 7239); LEMTA - Laboratoire d'Energétique et de Mécanique Théorique et Appliquée; ENSAM - Ecole Nationale Supérieure d'Arts et Métiers; CNRS - Centre national de la recherche scientifique, Aug 2025, Metz, France

Communication dans un congrès hal-05313149v1
Deposit thumbnail

Heterogeneous testing model calibration as input to virtual forming of dual phase steels

Lisa Germain , Mafalda Gonçalves , Antonio Andrade-Campos , Sandrine Thuillier

Numisheet 2025, Jul 2025, Münich, Germany. pp.012046, ⟨10.1088/1742-6596/3104/1/012046⟩

Communication dans un congrès hal-05421485v1
Deposit thumbnail

Material Parameter Identification Based on Heterogeneous Testing: Validation in case of a forming process

Lisa Germain , Mafalda Gonçalves , Antonio Andrade-Campos , Sandrine Thuillier

IDDRG 2025, Jun 2025, Lisbon, Portugal. pp.01075, ⟨10.1051/matecconf/202540801075⟩

Communication dans un congrès hal-05102080v1

Comparison of homogeneous anisotropic hardening models in the case of the direct redrawing of a DP600 steel

N. Gautam , S. Yoon , F. Barlat , S. Thuillier

43RD INTERNATIONAL DEEP DRAWING RESEARCH GROUP, IDDRG CONFERENCE, 2024, Mar 2024, DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND, Unknown Region. ⟨10.1088/1757-899X/1307/1/012029⟩

Communication dans un congrès hal-05061993v1

Experimental investigation of heterogeneous mechanical tests

M. Gonçalves , Sandrine Thuillier

Material Forming, 2024, Toulouse, France. pp.1742-1751, ⟨10.21741/9781644903131-193⟩

Communication dans un congrès hal-04685716v1

Calibration of the Elasto-Plastic Properties of Friction Stir Welded Blanks in Aluminum Alloy AA6082

Fausto Tucci , António Andrade-Campos , Sandrine Thuillier , Pierpaolo Carlone

ESAFORM2022, Apr 2022, Braga (Portugal), Portugal. pp.2183-2192, ⟨10.4028/p-3a8e45⟩

Communication dans un congrès hal-05337766v1

Performance Evaluation of Lubricants with Swift Cup Drawing

Nathan Demazel , Ahmed Kacem , Sandrine Thuillier , Hervé Laurent , Patrick Briend et al.

ESAFORM 2022, Apr 2022, Braga, PORTUGAL, Portugal. pp.1195-1203, ⟨10.4028/p-qh2392⟩

Communication dans un congrès hal-04650001v1

On the topology design of a mechanical heterogeneous specimen using geometric and material nonlinearities

M Gonçalves , A Andrade-Campos , S Thuillier

INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2022), Université Bretagne Sud, Jun 2022, Lorient (56100), France. pp.012055, ⟨10.1088/1757-899X/1238/1/012055⟩

Communication dans un congrès hal-04693431v1

Error Estimation of the 3D Reconstruction of a Displacement Field from DIC Measurements

Miguel Guimarães Oliveira , Attilio Lattanzi , Sandrine Thuillier , António Andrade-Campos , Marco Rossi

ESAFORM 2022, Apr 2022, Braga (Portugal), Portugal. pp.2129-2136, ⟨10.4028/p-abe455⟩

Communication dans un congrès hal-05337769v1

Prediction of forming limit curve for AA6061-T6 at room and elevated temperatures

Ahmed Kacem , Hervé Laurent , Sandrine Thuillier

IDDRG2022, Jun 2022, Lorient (56100), France. pp.012044, ⟨10.1088/1757-899X/1238/1/012044⟩

Communication dans un congrès hal-04649973v1
Deposit thumbnail

Influence of temperature on the formability of an aluminum alloy

Ahmed Kacem , Hervé Laurent , Sandrine Thuillier

ESAFORM 2021 24th International Conference on Material Forming, University of Liège, Belgium, Apr 2021, Liège, Belgium. ⟨10.25518/esaform21.1511⟩

Communication dans un congrès hal-05337723v1
Deposit thumbnail

On the Elastoplastic Behavior of Friction Stir Welded Tailored Blanks for Single Point Incremental Forming

Fausto Tucci , António Andrade-Campos , Sandrine Thuillier , Pierpaolo Carlone

ESAFORM 2021 24th International ESAFORM Conference on Material Forming, University of Liège, Apr 2021, Liège, Belgium. ⟨10.25518/esaform21.437⟩

Communication dans un congrès hal-05337732v1

Uncertainty quantification in the volume reconstruction from stereo-DIC measurements using virtual experiments

Mg Oliveira , A. Lattanzi , A. Andrade-Campos , S. Thuillier , M. Rossi

7e conférence internationale Photomechanics – IDICS, Nov 2021, Nantes (France), France. ⟨10.5281/zenodo.6908611⟩

Communication dans un congrès hal-05337770v1

Analysis of Heterogeneous Tests for Sheet Metal Mechanical Behavior

Miguel Guimarães Oliveira , Sandrine Thuillier , António Andrade-Campos

23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, ESAFORM, May 2020, Cottbus (online), Germany. pp.831-838, ⟨10.1016/j.promfg.2020.04.259⟩

Communication dans un congrès hal-04693606v1
Deposit thumbnail

Analysis of Heterogeneous Tests for Sheet Metal Mechanical Behavior ESAFORM

M.G. Oliveira , Sandrine Thuillier , A. Andrade Campos

ESAFORM, May 2020, Cottbus, Germany

Communication dans un congrès hal-05009068v1

Integrated Design in Welding and Incremental Forming: Material Model Calibration for Friction Stir Welded Blanks

António Andrade-Campos , Sandrine Thuillier , João Martins , Pierpaolo Carlone , Fausto Tucci et al.

23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, ESAFORM, May 2020, Cottbus (online), Germany. pp.429-434, ⟨10.1016/j.promfg.2020.04.327⟩

Communication dans un congrès hal-04693577v1

Calibration of Johnson-Cook Model Using Heterogeneous Thermo-Mechanical Tests

João Peixoto Martins , António Andrade-Campos , Sandrine Thuillier

23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, May 2020, Cottbus (online), Germany. pp.881-888, ⟨10.1016/j.promfg.2020.04.274⟩

Communication dans un congrès hal-05009057v1
Deposit thumbnail

Incremental forming of Titanium T40 sheet: experimental and numerical investigations

A. Abdelkefi , D. Guines , L. Leotoing , S. Thuillier

24ème Congrès Français de Mécanique, Aug 2019, Brest, France

Communication dans un congrès hal-02328578v1

Integrated design in welding and incremental forming: Mechanical behavior of friction stir welded blanks

S. Thuillier , A. Andrade-Campos , P. Carlone , R. Valente , R. de Sousa

PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, ESAFORM, May 2019, Vitoria-Gasteiz, Spain. pp.060010, ⟨10.1063/1.5112605⟩

Communication dans un congrès hal-04693635v1

Influence of the mechanical model of titanium T40 on the predicted forces during incremental forming process

A. Abdelkefi , D. Guines , Lionel Leotoing , S. Thuillier

22nd International ESAFORM Conference on Material Forming, ESAFORM 2019, May 2019, Vitoria-Gasteiz, Spain. pp.170010, ⟨10.1063/1.5112726⟩

Communication dans un congrès hal-02281899v1

Strain path change influence on residual stress after deep drawing

D. Herault , S. Thuillier , P. Manach

PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, ESAFORM, May 2019, Vitoria-Gasteiz, Spain. pp.060002, ⟨10.1063/1.5112597⟩

Communication dans un congrès hal-04693640v1

Calibration of Anisotropic Plasticity Models with an Optimized Heterogeneous Test and the Virtual Fields Method

J.M.P. Martins , S. Thuillier , A. Andrade-Campos

2019 Annual Conference on Experimental and Applied Mechanics, Mar 2019, Reno, NV, United States. pp.25-32, ⟨10.1007/978-3-030-30098-2_5⟩

Communication dans un congrès hal-05337739v1

Rupture Model Based on Non-Associated Plasticity

Adrien Pradeau , Jeong Whan Yoon , Sandrine Thuillier , Yanshan Lou , Shunying Zhang

21st International ESAFORM Conference on Material Forming (ESAFORM), Apr 2018, Univ Palermo, Palermo, ITALY, Italy. ⟨10.1063/1.5034937⟩

Communication dans un congrès hal-02069335v1

On the Design of Innovative Heterogeneous Tests Using a Shape Optimization Approach

J. Aquino , A. Andrade Campos , N. Souto , S. Thuillier

21st International ESAFORM Conference on Material Forming (ESAFORM), Apr 2018, Univ Palermo, Palermo, ITALY, Italy. ⟨10.1063/1.5034958⟩

Communication dans un congrès hal-02069336v1

Strain path changes in Reverse Redrawing of DP Steels

Diane Herault , Sandrine Thuillier , Pierre-Yves Manach , Jean-Louis Duval

INTERNATIONAL DEEP DRAWING RESEARCH GROUP 37TH ANNUAL CONFERENCE, IDDRG, Jun 2018, Waterloo, Canada, Canada. pp.012042, ⟨10.1088/1757-899X/418/1/012042⟩

Communication dans un congrès hal-04693653v1

Identification of Material Parameters or Plasticity Models A Comparative Study on the Finite Element Model Updating and the Virtual Fields Method

J. M. P. Martins , S. Thuillier , A. Andrade-Campos

21st International ESAFORM Conference on Material Forming (ESAFORM), Apr 2018, Univ Palermo, Palermo, ITALY, Italy. ⟨10.1063/1.5034964⟩

Communication dans un congrès hal-02069341v1

Experimental validation of a new heterogeneous mechanical test design

J. Aquino , A. Andrade Campos , N. Souto , S. Thuillier

21st International ESAFORM Conference on Material Forming (ESAFORM), Apr 2018, Univ Palermo, Palermo, ITALY, Italy. ⟨10.1063/1.5034928⟩

Communication dans un congrès hal-02069334v1

Design of a reverse deep drawing experiment enhancing strain path changes

N. Ayachi , N. Guermazi , Py Manach , S Thuillier

NUMISHEET 2018: 11TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, NUMISHEET, Jul 2018, Tokyo (Japan), Japan. pp.012133, ⟨10.1088/1742-6596/1063/1/012133⟩

Communication dans un congrès hal-04695307v1

2D springback and twisting after drawing of copper alloy sheets

S. Thuillier , C.H. Pham , P.Y. Manach

NUMISHEET 2018: 11TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, NUMISHEET, Jul 2018, Tokyo (Japan), Japan. pp.012124, ⟨10.1088/1742-6596/1063/1/012124⟩

Communication dans un congrès hal-04693661v1

Experimental and numerical investigation of the formability of an ultra-thin copper sheet

C. H. Pham , S. Thuillier , P. Y. Manach

36th IDDRG Conference on Materials Modelling and Testing for Sheet Metal Forming, Jul 2017, Tech Univ Munich, Chair Met Forming and Casting, Munich, GERMANY, France. ⟨10.1088/1742-6596/896/1/012109⟩

Communication dans un congrès hal-02008169v1
Deposit thumbnail

Modélisation du comportement d'un thermoplastique renforcé par des fibres de verre discontinues lors de cycles de charges, décharges et relaxations

Delphine Lopez , Sandrine Thuillier , Yves Grohens

Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France

Communication dans un congrès hal-01623688v1

Design of a mechanical test to characterize sheet metals - Optimization using B-splines or cubic splines

Nelson Souto , Sandrine Thuillier , A. Andrade-Campos

ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming, ESAFORM, Apr 2016, Nantes, France. pp.040005, ⟨10.1063/1.4963427⟩

Communication dans un congrès hal-04695324v1

Prediction of the bending behavior after pre-strain of an aluminum alloy

A. Pradeau , S. Thuillier , J. Yoon

ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming, ESAFORM, Apr 2016, Nantes, France. pp.060015, ⟨10.1063/1.4963451⟩

Communication dans un congrès hal-04695331v1

Anisotropic mechanical behavior of an injection molded short fiber reinforced thermoplastic

Delphine Lopez , Sandrine Thuillier , Nicolas Bessières , Yves Grohens

ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming, ESAFORM, Apr 2016, Nantes, France. pp.060007, ⟨10.1063/1.4963443⟩

Communication dans un congrès hal-04695330v1

Prediction of plastic instabilities under thermo-mechanical loadings in tension and simple shear

P. Y. Manach , L. F. Mansouri , S. Thuillier

10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Sep 2016, Bristol, ENGLAND, France. ⟨10.1088/1742-6596/734/3/032056⟩

Communication dans un congrès hal-02110741v1

Calibration of anisotropic yield criterion with conventional tests or biaxial test

Zhang Shunying , Lionel Leotoing , Dominique Guines , Sandrine Thuillier

IDDRG2015, May 2015, Shanghai, China

Communication dans un congrès hal-01186218v1
Deposit thumbnail

Multi-stage hot forming process of shackles

Julien Cochet , Sandrine Thuillier , Pierre-Yves Manach , Nicolas Decultot

CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France

Communication dans un congrès hal-03446140v1
Deposit thumbnail

Identification of Anisotropic Yield Criterion Parameters from a Single Biaxial Tensile Test

Shunying Zhang , Lionel Leotoing , Dominique Guines , Sandrine Thuillier

ESAFORM 2014, May 2014, Espoo, Finland. pp.1710-1717, ⟨10.4028/www.scientific.net/KEM.611-612.1710⟩

Communication dans un congrès hal-00992888v1

Twisting of sheet metals

C. Pham , S. Thuillier , P. Manach

NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes: Part A Benchmark Problems and Results and Part B General Papers, Jan 2014, Melbourne, France. pp.422-427, ⟨10.1063/1.4850005⟩

Communication dans un congrès hal-04698679v1

Influence of prestrain on the occurrence of PLC effect in an Al-Mg alloy

P. Manach , J. Coër , H. Laurent , C. Bernard , S. Thuillier

NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes: Part A Benchmark Problems and Results and Part B General Papers, Jan 2014, Melbourne, France. pp.428-432, ⟨10.1063/1.4850006⟩

Communication dans un congrès hal-04698681v1
Deposit thumbnail

Manifestation de l'effet Portevin-Le Châtelier en cisaillement simple

Jérémy Coër , Hervé Laurent , Sandrine Thuillier , Pierre-Yves Manach

CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France

Communication dans un congrès hal-03440438v1

Ductile Damage in Tension and Bending for DP980 Steel Sheets

Julien Troufflard , Guillermo Requena , Sandrine Thuillier , Eric Maire

Key Engineering Materials, 2013, Unknown, Unknown Region. pp.110--117, ⟨10.4028/www.scientific.net/KEM.554-557.110⟩

Communication dans un congrès hal-01538213v1
Deposit thumbnail

Calibration of material parameters of anisotropic yield criterion with conventional tests and biaxial test

Shunying Zhang , Lionel Leotoing , Dominique Guines , Sandrine Thuillier

16th annual ESAFORM Conference on Material Forming, Apr 2013, Aveiro, Portugal. pp.2111-2117, ⟨10.4028/www.scientific.net/KEM.554-557.2111⟩

Communication dans un congrès hal-00872583v1
Deposit thumbnail

Mechanical behavior of mild steel up to rupture: characterization and validation

Nelson Souto , António Andrade-Campos , Sandrine Thuillier

2nd ECCOMAS Young Investigators Conference (YIC 2013), Sep 2013, Bordeaux, France

Communication dans un congrès hal-00855887v1

Characterization of sheet metal plastic anisotropy by cross biaxial tensile test

Shunying Zhang , Lionel Leotoing , Dominique Guines , Sandrine Thuillier

Colloque Journée SF2M Section Ouest, Apr 2013, Lorient, France

Communication dans un congrès hal-00872589v1
Deposit thumbnail

Vrillage de tôles métalliques ultra-minces après emboutissage

Cong Hanh Pham , Sandrine Thuillier , Pierre-Yves Manach

CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France

Communication dans un congrès hal-03440504v1

Surface defects in sheet metal forming : a simulative laboratory device and comparison with FE analysis

Sandrine Thuillier , A. Le Port , Pierre-Yves Manach

8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Aug 2011, Séoul, South Korea. ⟨10.1063/1.3623693⟩

Communication dans un congrès hal-00716990v1

Investigation of Ductile Damage in DP980 Steel Sheets Using Mechanical Tests and X-ray Micro-Tomography

A Mishra , C Leguen , S Thuillier , E Maire , Gary Menary

AIP Conference Proceedings, 2011, Unknown, Ireland. pp.1464--1469, ⟨10.1063/1.3589723⟩

Communication dans un congrès hal-01538230v1

Caractérisation du comportement mécanique d'un alliage d'aluminium en expansion biaxiale - Application aux courbes limite de formage

Lionel Leotoing , Sandrine Thuillier , Dominique Guines

JAUM2010, Aug 2010, Lorient, France

Communication dans un congrès hal-00951394v1
Deposit thumbnail

A multi-step assembly process: drawing, flanging and hemming of metallic sheets

Pierre-Yves Manach , Nicolas Le Maoût , Sandrine Thuillier

ICEM 14 – 14th International Conference on Experimental Mechanics, Jul 2010, Poitiers, France. pp.08004, ⟨10.1051/epjconf/20100608004⟩

Communication dans un congrès hal-00717168v1
Deposit thumbnail

Mise en forme des matériaux métalliques par déformation plastique : influence du comportement matériel

Pierre-Yves Manach , Sandrine Thuillier , Hervé Laurent , Nicolas Le Maoût , Renaud Grèze

Colloque National de la Recherche en IUT CNRIUT 2008, May 2008, Lyon, France. pp.8

Communication dans un congrès hal-00269038v1

Experimental and numerical characterization of the surface defects of an automotive door

A. Le Port , Sandrine Thuillier , Pierre-Yves Manach , J. Garabed

7th International Conference and Workshop on Numerical Simulation of 3D Sheet metal Forming Processes, Sep 2008, Interlaken, Switzerland. pp.773-778

Communication dans un congrès hal-00401472v1

Numerical simulation of the hemming process - Integration in the virtual design of automotive parts

Nicolas Le Maoût , Sandrine Thuillier , Pierre-Yves Manach , O. Pauvert

7th International Conference and Workshop on Numerical Simulation of 3D Sheet metal Forming Processes Numisheet 2008, Sep 2008, Interlaken, Switzerland

Communication dans un congrès hal-00404095v1

Experimental and numerical analysis of a two-stage deep drawing process involving strain path changes

Sandrine Thuillier , Pierre-Yves Manach , L.F. Menezes

International Conference on Advances in Materials and Processing Technologies, Nov 2008, Manama, Bahrain

Communication dans un congrès hal-00404337v1

Modélisation micromécanique du comportement de composites à matrice polymère

Sandrine Thuillier , Philippe Pilvin , Gilles Ausias , Thomas Parenteau , Yves Grohens

Journée d'étude thématique SF2M Ouest, Mar 2008, Poitiers, France

Communication dans un congrès hal-00400008v1

Influence of the temperature on residual stresses and springback effect in an aluminium alloy

Pierre-Yves Manach , Renaud Grèze , Hervé Laurent , Sandrine Thuillier , L.F. Menezes

Advances in Materials and Processing Technologies (AMPT2008), Nov 2008, Manama, Bahrain. ⟨10.1016/j.ijmecsci.2010.04.008⟩

Communication dans un congrès istex hal-00404052v1

Non-linear mechanical behaviour of carbon black reinforced elastomers : experiments and self-consistent model

B. Omnès , Sandrine Thuillier , Philippe Pilvin , S. Gillet

Third China-Europe Symposium on Processing and Properties of Reinforced Polymers, Jun 2007, Budapest, Hungary

Communication dans un congrès hal-00404092v1

Approche multi-échelle du comportement des élastomères chargés

B. Omnès , Philippe Pilvin , Sandrine Thuillier , S. Gillet

21ème colloque sur la Déformation des Polymères Solides DEPOS21, Oct 2007, Lille, France

Communication dans un congrès hal-00404098v1

Non linear mechanical behaviour of carbon black filled natural rubber: modelling and finite element application

B. Omnès , Sandrine Thuillier , Philippe Pilvin , S. Gillet

5th European Conference on Constitutive Models for Rubber, Sep 2007, Paris, France

Communication dans un congrès hal-00404081v1

numerical simulation of flat-surface roll hemming : influence of geometry and material model

Nicolas Le Maoût , S. Thuillier , P.Y. Manach , D. Debois , J.C Wadoux

International deep drawing research group conference IDDRG, Jun 2009, Porto, Portugal. pp.226-233

Communication dans un congrès hal-00601014v1

Prise en compte de la phase d'emboutissage sur la simulation d'impact de dôme

Vincent Grolleau , Bertrand Galpin , Gérard Rio , Sandrine Thuillier , Laurent Mahéo

Sécurité dans le transport, Oct 2006, Bordeaux, France

Communication dans un congrès hal-00402049v1

Comparison of Experimental and Simulated Results for a Mild Steel and a Dual-Phase Steel Deformed under Tension and Deep-Drawing

S. Thuillier , J. Luís Alves , Luís Filipe Menezes , P.Y. Manach

ADVANCED MATERIALS FORUM I, Portuguese Materials Society, Apr 2002, Virtual En ligne, Portugal. pp.549-554, ⟨10.4028/www.scientific.net/KEM.230-232.549⟩

Communication dans un congrès hal-04700399v1

Reverse Deep Drawing: Experimental and Numerical Simulation Results

P.Y. Manach , Marta Oliveira , S. Thuillier , Luís Filipe Menezes

ADVANCED MATERIALS FORUM I, Portuguese Materials Society, Apr 2002, Virtual En ligne, Portugal. pp.541-544, ⟨10.4028/www.scientific.net/KEM.230-232.541⟩

Communication dans un congrès hal-04700393v1