Sébastien CHARLON

Enseignant Chercheur
37 %
Libre accès
27
Documents
Affiliation actuelle
  • Centre for Materials and Processes (CERI MP - IMT Nord Europe)
Contact

Domaines de recherche

Matériaux Polymères

Compétences

Fabrication additive Caractérisation des polymères Mise en forme des polymères

Publications

Publications

How impactful is die swell in material extrusion-based additive manufacturing of thermoplastic polymers?

Trystan Domenech , Pierre Ovlaque , Yves Trolez , Dominique Olivier , Benjamin Bujeau et al.

Progress in Additive Manufacturing, 2025, 10 (12), pp.11393-11404. ⟨10.1007/s40964-025-01293-0⟩

Article dans une revue hal-05266938v1
Deposit thumbnail

Unveiling the Amorphous Phase Contribution to Shear Piezoelectric Properties of Polylactide

Hui Shen , Sébastien Charlon , Cédric Samuel

Macromolecules, 2025, ⟨10.1021/acs.macromol.5c01023⟩

Article dans une revue hal-05176283v1

Influence of process parameters on the occurrence of defects and dimensional properties of green part produced by material extrusion of highly filled polymer

Raphaël Côté , Dorian Delbergue , Vincent Demers , Nicole Demarquette , Sébastien Charlon et al.

Progress in Additive Manufacturing, 2024, 10 (1), pp.409-425. ⟨10.1007/s40964-024-00632-x⟩

Article dans une revue hal-05190171v1

Competition between bead boundary fusion and crystallization kinetics in material extrusion-based additive manufacturing

Trystan Domenech , Pierre Ovlaque , Yves Trolez , Dominique Olivier , Benjamin Bujeau et al.

Additive Manufacturing, 2024, 92, pp.104395. ⟨10.1016/j.addma.2024.104395⟩

Article dans une revue hal-04819267v1
Deposit thumbnail

3D printed PLGA implants: How the filling density affects drug release

C. Bassand , F. Siepmann , L. Benabed , J. Verin , J. Freitag et al.

Journal of Controlled Release, 2023, Journal of Controlled Release, 363, pp.1-11. ⟨10.1016/j.jconrel.2023.09.020⟩

Article dans une revue hal-04301938v1
Deposit thumbnail

3D printed PLGA implants: APF DDM vs. FDM

C. Bassand , L. Benabed , Sébastien Charlon , J. Verin , J. Freitag et al.

Journal of Controlled Release, 2023, 353, pp.864-874. ⟨10.1016/j.jconrel.2022.11.052⟩

Article dans une revue hal-04301963v1

A strategy to eliminate interbead defects and improve dimensional accuracy in material extrusion 3D printing of highly filled polymer

Raphaël Côté , Vincent Demers , Nicole Demarquette , Sébastien Charlon , Jérémie Soulestin

Additive Manufacturing, 2023, 68, pp.103509. ⟨10.1016/j.addma.2023.103509⟩

Article dans une revue hal-04301950v1
Deposit thumbnail

Effects of printed bead volume on thermal history, polymer degree of crystallinity and mechanical properties in large scale additive manufacturing

L. Malagutti , Sébastien Charlon , V. Mazzanti , F. Mollica

Journal of Materials Processing Technology, 2023, 316, pp.117961. ⟨10.1016/j.jmatprotec.2023.117961⟩

Article dans une revue hal-04301824v1

On the temperature evolution and related crystallinity of polypropylene parts processed via material extrusion

Pierre Ovlaque , Marie Bayart , Jérémie Soulestin , Yves Trolez , Dominique Olivier et al.

Additive Manufacturing, 2022, 58, pp.103065. ⟨10.1016/j.addma.2022.103065⟩

Article dans une revue hal-04301982v1
Deposit thumbnail

Pellet-Based Fused Filament Fabrication (FFF)-Derived Process for the Development of Polylactic Acid/Hydroxyapatite Scaffolds Dedicated to Bone Regeneration

Marie Bayart , Marie Dubus , Sébastien Charlon , Halima Kerdjoudj , Nicolas Baleine et al.

Materials, 2022, 15 (16), pp.5615. ⟨10.3390/ma15165615⟩

Article dans une revue hal-03772019v1

How does the temperature of polymer bead influence the kinetics of coalescence in additive manufacturing processes?

Julien Le Boterff , Sébastien Charlon , Jérémie Soulestin

Journal of Applied Polymer Science, 2021, 139 (11), ⟨10.1002/app.51782⟩

Article dans une revue hal-04302022v1
Deposit thumbnail

Fused filament fabrication of polypropylene: Influence of the bead temperature on adhesion and porosity

Sébastien Charlon , Julien Le Boterff , Jérémie Soulestin

Additive Manufacturing, 2021, 38, pp.101838. ⟨10.1016/j.addma.2021.101838⟩

Article dans une revue hal-03183421v1
Deposit thumbnail

Fused filament fabrication of scaffolds for tissue engineering; how realistic is shape-memory? A review

Marie Bayart , Sébastien Charlon , Jérémie Soulestin

Polymer, 2021, 217, pp.123440. ⟨10.1016/j.polymer.2021.123440⟩

Article dans une revue hal-03183431v1

Minimise thermo-mechanical batch variations when processing medical grade lactide based copolymers in additive manufacturing

Astrid Ahlinder , Sebastien Charlon , Tiziana Fuoco , Jérémie Soulestin , Anna Finne-Wistrand

Polymer Degradation and Stability, 2020, 181, pp.109372. ⟨10.1016/j.polymdegradstab.2020.109372⟩

Article dans une revue hal-03183434v1

Thermal and geometry impacts on the structure and mechanical properties of part produced by polymer additive manufacturing

Sébastien Charlon , Jérémie Soulestin

Journal of Applied Polymer Science, 2020, 137 (35), pp.49038. ⟨10.1002/app.49038⟩

Article dans une revue hal-03183420v1

Impression 3D de polymères semi-cristallins

Sébastien Charlon , Jérémie Soulestin , Marie-France Lacrampe , Patricia Krawczak

Plastiques et Caoutchouc Magazine, 2017, 942, pp.58-61

Article dans une revue hal-01773486v1

Poly[(Butylene Succinate)- \emphCo -(Butylene Adipate)]-Montmorillonite Nanocomposites Prepared by Water-Assisted Extrusion: Role of the Dispersion Level and of the Structure-Microstructure on the Enhanced Barrier Properties

Sébastien Charlon , Nadège Follain , Eric Dargent , Jérémie Soulestin , Michel Sclavons et al.

Journal of Physical Chemistry C, 2016, 120 (24), pp.13234-13248. ⟨10.1021/acs.jpcc.6b00339⟩

Article dans une revue hal-01954228v1

Influence of Crystallinity on the Dielectric Relaxations of Poly(Butylene Succinate) and Poly[(Butylene Succinate)- Co -(Butylene Adipate)]

Sébastien Charlon , Laurent Delbreilh , Eric Dargent , Nadège Follain , Jérémie Soulestin et al.

European Polymer Journal, 2016, 84, pp.366-376. ⟨10.1016/j.eurpolymj.2016.09.045⟩

Article dans une revue istex hal-01954223v1

Water Transport Properties of Poly(butylene succinate) and Poly[(butylene succinate)- co -(butylene adipate)] Nanocomposite Films: Influence of the Water-Assisted Extrusion Process

Sébastien Charlon , Nadège Follain , Jérémie Soulestin , Michel Sclavons , Stéphane Marais

Journal of Physical Chemistry C, 2016, 121 (1), pp.918-930. ⟨10.1021/acs.jpcc.6b11077⟩

Article dans une revue hal-02329121v1

Structure–barrier property relationship of biodegradable poly(butylene succinate) and poly[(butylene succinate)-co-(butylene adipate)] nanocomposites: influence of the rigid amorphous fraction

Sébastien Charlon , S. Marais , E. Dargent , J. Soulestin , M. Sclavons et al.

Physical Chemistry Chemical Physics, 2015, 17 (44), pp.29918-29934. ⟨10.1039/c5cp04969e⟩

Article dans une revue hal-04301991v1

Improvement of barrier properties of bio-based polyester nanocomposite membranes by water-assisted extrusion

Sébastien Charlon , Nadège Follain , Corinne Chappey , Eric Dargent , Jérémie Soulestin et al.

Journal of Membrane Science, 2015, 496, pp.185-198. ⟨10.1016/j.memsci.2015.08.043⟩

Article dans une revue istex hal-02329019v1

Structure–barrier property relationship of biodegradable poly(butylene succinate) and poly[(butylene succinate)-co-(butylene adipate)] nanocomposites: influence of the rigid amorphous fraction

S. Charlon , S. Marais , E. Dargent , J. Soulestin , M. Sclavons et al.

Physical Chemistry Chemical Physics, 2015, 17 (44), pp.29918-29934. ⟨10.1039/c5cp04969e⟩

Article dans une revue hal-02329037v1

How impactful is die swell in material extrusion-based additive manufacturing of thermoplastic polymers?

Trystan Domenech , Pierre Ovlaque , Yves Trolez , Dominique Olivier , Benjamin Bujeau et al.

Annual European Rheology Conference 2025, Apr 2025, Lyon, France

Communication dans un congrès hal-05151478v1

How the Competition Between Bead Boundary Coalescence and Crystallization Kinetics Drives Material Extrusion-Based Additive Manufacturing Processing

Trystan Domenech , Pierre Ovlaque , Yves Trolez , Dominique Olivier , Benjamin Bujeau et al.

ACS Spring 2025, Mar 2025, San Diego, CA, United States

Communication dans un congrès hal-05151459v1

Optimization of the UV stabilization of a plasticized PVC film for exterior automotive applications

Hélène Delinière , Jacques Lefranc , Fabienne Deuzé , Laurent Darcheville , Jérémie Soulestin et al.

PROCEEDINGS OF THE 35TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-35), 2020, Cesme-Izmir, France. pp.020007, ⟨10.1063/1.5142922⟩

Communication dans un congrès hal-03183444v1

Freeformer technology, optimization of processing parameters

Jeremie Soulestin , Sébastien Charlon , Marie-France Lacrampe , Patricia Krawczak

Europolymer Conference EUPOC 2017 "Polymers and Additive Manufacturing: From Fundamentals to Applications", European Polymer Federation, May 2017, Gargano, Italy

Communication dans un congrès hal-01782333v1

New opportunities offered by Freeformer 3D printing process

Sébastien Charlon , Jeremie Soulestin , Marie-France Lacrampe , Patricia Krawczak

32nd Annual Meeting of Polymer Processing Society (PPS-32), Jul 2016, Lyon, France

Communication dans un congrès hal-01779762v1