MT

Mabrouki Tarek

29%
Libre accès
114
Documents
Affiliations actuelles
  • Ecole Nationale d'Ingénieurs de Tunis (ENIT)
  • Institut National des Sciences Appliquées de Lyon (INSA Lyon)
  • ENSAM PARIS
Identifiants chercheurs
Contact

Publications

Publications

3D macro-mechanical FE simulation for GLARE® drilling with experimental validation

Imed Boughdiri , Tarek Mabrouki , Redouane Zitoune , Khaled Giasin , Mohamed Faycal Ameur
Composite Structures, 2023, 304, pp.116458. ⟨10.1016/j.compstruct.2022.116458⟩
Article dans une revue hal-04028042 v1
Image document

Effect of cutting parameters on thrust force, torque, hole quality and dust generation during drilling of GLARE 2B laminates

Imed Boughdiri , Khaled Giasin , Tarek Mabrouki , Redouane Zitoune
Composite Structures, 2021, 261, pp.113562. ⟨10.1016/j.compstruct.2021.113562⟩
Article dans une revue hal-03327319 v1

Modelling of macroscopic cutting forces in internal broaching of an X12Cr13 stainless steel

Dorian Fabre , Cedric Bonnet , Tarek Mabrouki , Joël Rech
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2020, 234 (11), pp.1379-1387. ⟨10.1177/0954405420911262⟩
Article dans une revue hal-04084605 v1
Image document

Textile composite structural analysis taking into account the forming process

Abderrahmen Aridhi , Makrem Arfaoui , Tarek Mabrouki , Naïm Naouar , Yvan Denis et al.
Composites Part B: Engineering, 2019, 166, pp.773-784. ⟨10.1016/j.compositesb.2019.02.047⟩
Article dans une revue hal-02399005 v1

Estimation and optimization of flank wear and tool lifespan in finish turning of AISI 304 stainless steel using desirability function approach

Lakhdar Bouzid , Sofiane Berkani , Mohamed Athmane Yallese , François Girardin , Tarek Mabrouki
International Journal of Industrial Engineering Computations, 2018, pp.349-368. ⟨10.5267/j.ijiec.2017.8.002⟩
Article dans une revue hal-01999581 v1
Image document

On the Modeling of Surface Roughness and Cutting Force when Turning of Inconel 718 Using Artificial Neural Network and Response Surface Methodology: Accuracy and Benefit

Hamid Tebassi , Mohamed Athmane Yallese , Ikhlas Meddour , François Girardin , Tarek Mabrouki
Periodica Polytechnica Mechanical Engineering, 2017, 61 (1), pp.1-11. ⟨10.3311/PPme.8742⟩
Article dans une revue hal-01999568 v1

Quality-productivity decision making when turning of Inconel 718 aerospace alloy: A response surface methodology approach

Hamid Tebassi , Mohamed Athmane Yallese , Salim Belhadi , François Girardin , Tarek Mabrouki
International Journal of Industrial Engineering Computations, 2017, pp.347-362. ⟨10.5267/j.ijiec.2016.12.003⟩
Article dans une revue hal-01999573 v1

Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods

A. Chabbi , A. Yallese , M. Nouioua , I. Meddour , T. Mabrouki et al.
International Journal of Advanced Manufacturing Technology, 2017, 91 (5-8), pp.2267-2290. ⟨10.1007/s00170-016-9858-8⟩
Article dans une revue hal-01999555 v1

Predictive modeling and multi-response optimization of technological parameters in turning of Polyoxymethylene polymer (POM C) using RSM and desirability function

Amel Chabbi , Mohamed Athmane Yallese , Ikhlas Meddour , Mourad Nouioua , Tarek Mabrouki et al.
Measurement - Journal of the International Measurement Confederation (IMEKO), 2017, 95, pp.99-115. ⟨10.1016/j.measurement.2016.09.043⟩
Article dans une revue hal-01999564 v1

Optimization of surface roughness in broaching

D. Fabre , C. Bonnet , J. Rech , T. Mabrouki
CIRP Journal of Manufacturing Science and Technology, 2017, 18, pp.115-127. ⟨10.1016/j.cirpj.2016.10.006⟩
Article dans une revue hal-04670979 v1

Modeling and optimization of surface roughness and productivity thru RSM in face milling of AISI 1040 steel using coated carbide inserts

Mohamed Fnides , Mohamed Yallese , Riad Khattabi , Tarek Mabrouki , François Girardin
International Journal of Industrial Engineering Computations, 2017, pp.493-512. ⟨10.5267/j.ijiec.2017.3.001⟩
Article dans une revue hal-01999574 v1

Numerical and experimental investigations of post-machining distortions in thin machined structures considering material-induced residual stress

W. Saleem Awan , Tarek Mabrouki
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39 (2), pp.509-521. ⟨10.1007/s40430-015-0386-5⟩
Article dans une revue hal-04662605 v1

Some insights on the modelling of chip formation and its morphology during metal cutting operations

Tarek Mabrouki , Cédric Courbon , Yancheng Zhang , Joël Rech , Daniel Nélias et al.
Comptes Rendus Mécanique, 2016, 344 (4-5), pp.335 - 354. ⟨10.1016/j.crme.2016.02.003⟩
Article dans une revue hal-01442818 v1

Performance of coated and uncoated mixed ceramic tools in hard turning process

Hamza Bensouilah , Hamdi Aouici , Ikhlas Meddour , Mohamed Athmane Yallese , Tarek Mabrouki et al.
Measurement - Journal of the International Measurement Confederation (IMEKO), 2016, 82, pp.1-18. ⟨10.1016/j.measurement.2015.11.042⟩
Article dans une revue hal-01999561 v1

Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology

Lakhdar Bouzid , Mohamed Athmane Yallese , Kamel Chaoui , Tarek Mabrouki , Lakhdar Boulanouar
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015, 229 (1), pp.45-61. ⟨10.1177/0954405414526385⟩
Article dans une revue hal-04710106 v1

A new procedure to increase the orthogonal cutting machining time simulated

Guediche Mayssa , Tarek Mabrouki , Christophe Donnet , Jean-Michel Bergheau , Hedi Hamdi
Procedia CIRP, 2015, 31, pp.299-303. ⟨10.1016/j.procir.2015.04.096⟩
Article dans une revue hal-01228822 v1
Image document

On the Selection of Johnson-cook Constitutive Model Parameters for Ti-6Al-4 V Using Three Types of Numerical Models of Orthogonal Cutting

Yancheng Zhang , J.C. Outeiro , Tarek Mabrouki
Article dans une revue hal-01442867 v1

On the turning modeling and simulation: 2D and 3D FEM approaches

M. Asad , T. Mabrouki , H. Ijaz , M. Aurangzeb Khan , W. Saleem
Mechanics & Industry, 2014, 15 (5), pp.427-434. ⟨10.1051/meca/2014045⟩
Article dans une revue hal-04710390 v1

Further insight into the chip formation of ferritic-pearlitic steels: microstructural evolutions and associated thermo-mechanical loadings

Cedric Courbon , Tarek Mabrouki , Joel Rech , Denis Mazuyer , F. Perrard et al.
International Journal of Machine Tools and Manufacture, 2014, 77, pp.34 - 46. ⟨10.1016/j.ijmachtools.2013.10.010⟩
Article dans une revue hal-00938538 v1

Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation

Yancheng Zhang , Xiaoying Zhuang , Jacob Muthu , Tarek Mabrouki , Michael Fontaine et al.
Composites Part B: Engineering, 2014, 63, pp.27 - 33. ⟨10.1016/j.compositesb.2014.03.009⟩
Article dans une revue hal-01442873 v1

RMS-based optimisation of surface roughness when turning AISI 420 stainless steel

Lakhdar Bouzid , Mohamed Athmane Yallese , Salim Belhadi , Tarek Mabrouki , Lakhdar Boulanouar
International Journal of Materials and Product Technology, 2014, 49 (4), pp.224-251. ⟨10.1504/IJMPT.2014.064934⟩
Article dans une revue hal-04710409 v1

Turning roughness model based on tool-nose displacements

Hessainia Zahia , Kribes Nabil , Mohamed Athmane Yallese , Tarek Mabrouki , Noureddine Ouelaa et al.
Mechanika, 2013, 19, pp.112-119. ⟨10.5755/j01.mech.19.1.3612⟩
Article dans une revue hal-00938372 v1
Image document

Turning modeling and simulation of an aerospace grade aluminum alloy using two-dimensional and three-dimensional finite element method

Muhammad Asad , Hassan Ijaz , Muhammad A. Khan , Tarek Mabrouki , Waqas Saleem
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013, 228 (3), pp.367-375. ⟨10.1177/0954405413501809⟩
Article dans une revue hal-04710326 v1

On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations

Zahia Hessainia , Ahmed Belbah , Mohamed Athmane Yallese , Tarek Mabrouki , Jean-Francois Rigal
Measurement - Journal of the International Measurement Confederation (IMEKO), 2013, 46, pp.1671 - 1681. ⟨10.1016/j.measurement.2012.12.016⟩
Article dans une revue istex hal-00938612 v1

An analytical solution on interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase

Yancheng Zhang , Junhua Zhao , Yue Jia , Tarek Mabrouki , Yadong Gong et al.
Composite Structures, 2013, 104, pp.261-269. ⟨10.1016/j.compstruct.2013.04.029⟩
Article dans une revue istex hal-00938430 v1

On the modelling of an aluminium alloy milling: 3d fem approach

Muhammad Asad , Tarek Mabrouki
Mechanika, 2013, 19, pp.588-592. ⟨10.5755/j01.mech.19.5.5538⟩
Article dans une revue hal-00938566 v1

Metallurgical aspects of material behaviour in cutting of aisi 1045

Cedric Courbon , Tarek Mabrouki , Joel Rech , Denis Mazuyer , F. Perrard et al.
Key Engineering Materials, 2013, 554-557, pp.2085-2092. ⟨10.4028/www.scientific.net/KEM.554-557.2085⟩
Article dans une revue hal-00966328 v1

Three-dimensional finite element modeling of rough to finish down-cut milling of an aluminum alloy

Muhammad Asad , Tarek Mabrouki , Asif A Memon , Syed Mushtaq A. Shah , Muhammad A. Khan
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013, 227, pp.75-83. ⟨10.1177/0954405412462811⟩
Article dans une revue hal-00938577 v1

On different fe-based models to simulate cutting operation of titanium alloy (ti-6al-4v)

Yancheng Zhang , D. Umbrello , Tarek Mabrouki , S. Rizzuti , Daniel Nelias et al.
Mechanika, 2013, 19, pp.349-357
Article dans une revue hal-00938377 v1

A multiscale cutting model based on the theory of gradient plasticity

Tarek Mabrouki , Jean-Francois Rigal , Muhammad Asad
Advanced Materials Research, 2013, 698, pp.99-106. ⟨10.4028/www.scientific.net/AMR.698.99⟩
Article dans une revue hal-00938633 v1

On the existence of a thermal contact resistance at the tool-chip interface in dry cutting of aisi 1045: formation mechanisms and influence on the cutting process

Cedric Courbon , Tarek Mabrouki , Joel Rech , Denis Mazuyer , Enrico D Eramo
Applied Thermal Engineering, 2013, 50, pp.1311-1325. ⟨10.1016/j.applthermaleng.2012.06.047⟩
Article dans une revue istex hal-00938561 v1

ON DIFFERENT FE-BASED MODELS TO SIMULATE CUTTING OPERATION OF TITANIUM ALLOY (TI-6AL-4V)

Y. Zhang , D. Umbrello , T. Mabrouki , S. Rizzuti , D. Nelias et al.
Mechanika, 2013, 19 (3), ⟨10.5755/j01.mech.19.3.4656⟩
Article dans une revue hal-01914241 v1

Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning aisi 4140 steel

Mohamed Elbah , Mohamed Athmane Yallese , Hamdi Aouici , Tarek Mabrouki , Jean-Francois Rigal
Measurement - Journal of the International Measurement Confederation (IMEKO), 2013, 46, pp.3041 - 3056. ⟨10.1016/j.measurement.2013.06.018⟩
Article dans une revue istex hal-00938597 v1

Cutting simulation capabilities based on crystal plasticity theory and discrete cohesive elements

Yancheng Zhang , Tarek Mabrouki , Daniel Nelias , Cedric Courbon , Joel Rech et al.
Journal of Materials Processing Technology, 2012, 212, pp.936-953. ⟨10.1016/j.jmatprotec.2011.12.001⟩
Article dans une revue istex hal-00938429 v1

Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of aisi 52100 steel

Mohamed Walid Azizi , Salim Belhadi , Mohamed Athmane Yallese , Tarek Mabrouki , Jean-Francois Rigal
Journal of Mechanical Science and Technology, 2012, 26, pp.4105-4114. ⟨10.1007/s12206-012-0885-6⟩
Article dans une revue istex hal-00938277 v1

Elaboration of analytical thermo-mechanical cutting model matched by numerical and experimental results

Ferdinando Salvatore , Tarek Mabrouki , Hedi Hamdi
Mechanika, 2012, 18, pp.705-712. ⟨10.5755/j01.mech.18.6.3161⟩
Article dans une revue hal-00966329 v1

Numerical and experimental study of residual stress induced by machining process

Ferdinando Salvatore , Faycel Halila , Tarek Mabrouki , Hedi Hamdi
International Journal of Surface Science and Engineering, 2012, 6, pp.136-147. ⟨10.1504/IJSURFSE.2012.046849⟩
Article dans une revue hal-00938325 v1

Analysis of surface roughness and cutting force components in hard turning with cbn tool: prediction model and cutting conditions optimization

Hamdi Aouici , Mohamed Athmane Yallese , Kamel Chaoui , Tarek Mabrouki , Jean-Francois Rigal
Measurement - Journal of the International Measurement Confederation (IMEKO), 2012, 45, pp.344-353. ⟨10.1016/j.measurement.2011.11.011⟩
Article dans une revue istex hal-00938386 v1

The use of numerical simulations to improve a new analytical chip formation model

Ferdinando Salvatore , Tarek Mabrouki , Hedi Hamdi
Mechanics & Industry, 2012, 13 (06), pp.405-414. ⟨10.1051/meca/2012033⟩
Article dans une revue hal-00950619 v1

Numerical simulation and analytical modelling of ploughing and elastic phenomena during machining processes

Ferdinando Salvatore , Tarek Mabrouki , Hedi Hamdi
International Journal of Surface Science and Engineering, 2012, 6 (3), pp.185-200. ⟨10.1504/IJSURFSE.2012.049064⟩
Article dans une revue hal-04710862 v1

Vers une demarche de caracterisation des performances d usinage d un acier

Cedric Courbon , Tarek Mabrouki , Joel Rech , Denis Mazuyer , Enrico D Eramo et al.
Matériaux et Techniques, 2011, 98, pp.369-376. ⟨10.1051/mattech/2010117⟩
Article dans une revue istex hal-00938562 v1

Towards a physical comprehension of material strengthening factors during macro to micro-scale

Muhammad Asad , Tarek Mabrouki , François Girardin , Yancheng Zhang , Jean Francois Rigal
Mechanika, 2011, 17 (1), pp.97-104
Article dans une revue hal-00581081 v1

New Thermal Issues on the Modelling of Tool-Workpiece Interaction: Application to Dry Cutting of AISI 1045 Steel

Cédric Courbon , Tarek Mabrouki , Joël Rech , Denis Mazuyer , Enrico d'Eramo
Advanced Materials Research, 2011, 223, pp.286-295. ⟨10.4028/www.scientific.net/AMR.223.286⟩
Article dans une revue hal-00629453 v1

On Methodologies inside Two Different Commercial Codes to Simulate the Cutting Operation

Yancheng Zhang , Domenico Umbrello , Tarek Mabrouki , Stefania Rizzuti , Daniel Nelias et al.
Advanced Materials Research, 2011, 223, pp.162-171. ⟨10.4028/www.scientific.net/AMR.223.162⟩
Article dans une revue hal-00629454 v1

FE-model for Titanium alloy (Ti-6Al-4V) cutting based on the identification of limiting shear stress at tool-chip interface

Yancheng Zhang , Tarek Mabrouki , Daniel Nelias , Y. Gong
International Journal of Material Forming, 2011, 4, pp.11-23. ⟨10.1007/s12289-010-0986-7⟩
Article dans une revue hal-00581097 v1

Modeling and optimization of hard turning of X38CrMoV5-1 steel with CBN tool: Machining parameters effects on flank wear and surface roughness†

Hamdi Aouici , Mohamed Athmane Yallese , Brahim Fnides , Kamel Chaoui , Tarek Mabrouki
Journal of Mechanical Science and Technology, 2011, 25 (11), pp.1-9. ⟨10.1007/s12206-011-0807-z⟩
Article dans une revue istex hal-00629451 v1

Analytical Model of Chip Formation in Case of Orthogonal Cutting Processes

Ferdinando Salvatore , Tarek Mabrouki , Hédi Hamdi
Advanced Materials Research, 2011, 223, pp.101-110. ⟨10.4028/www.scientific.net/AMR.223.101⟩
Article dans une revue hal-00629452 v1

Chip formation in orthogonal cutting considering interface limiting shear stress and damage evolution based on fracture energy approach

Yancheng Zhang , Tarek Mabrouki , Daniel Nelias , Yadong Gong
Finite Elements in Analysis and Design, 2011, 47, pp.850-863. ⟨10.1016/j.finel.2011.02.016⟩
Article dans une revue istex hal-00629449 v1

Application of response surface methodology for determining cutting force model in turning hardened AISI H11 hot work tool steel

B. Fnides , M.A. Yallese , Tarek Mabrouki , Jean Francois Rigal
Sadhana, 2011, 36 (1), pp.109-123. ⟨10.1007/s12046-011-0007-7⟩
Article dans une revue hal-00581074 v1

Comportement en cisaillement de materiaux composites carbone/pps et carbone/peek sous haute temperature

Q. Chen , Philippe Boisse , Tarek Mabrouki , Abdelghani Saouab , Chung Hae Park et al.
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2011, 21, pp.105-117
Article dans une revue hal-00938548 v1

Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark

M.A. Khan , Tarek Mabrouki , Emmanuelle Vidal-Salle , Philippe Boisse
Journal of Materials Processing Technology, 2010, 210, pp. 378-388. ⟨10.1016/j.jmatprotec.2009.09.027⟩
Article dans une revue istex hal-00505131 v1

Finite-element-based hybrid dynamic cutting model for aluminium alloy milling

Muhammad Asad , Tarek Mabrouki , J-F Rigal
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2010, 224 (1), pp.1-13. ⟨10.1243/09544054JEM1590⟩
Article dans une revue hal-00502236 v1

Textile composite forming simulations at meso and macro scale

Nahiene Hamila , Naim Akhtar Akhtar Khan , Sébastien Gatouillat , Emmanuel de Luycker , Emmanuelle Vidal-Salle et al.
World Journal of Engineering, 2010, 7 (1), pp.123-129
Article dans une revue hal-00581092 v1

BENCHMARK STUDY OF FINITE ELEMENT MODELS FOR SIMULATING THE THERMOSTAMPING OF WOVEN-FABRIC REINFORCED COMPOSITES

J. Sargent , J. Chen , J. Sherwood , J. Cao , P. Boisse et al.
International Journal of Material Forming, 2010, 3 (1), pp.683-686. ⟨10.1007/s12289-010-0862-5⟩
Article dans une revue hal-04711586 v1

Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool

K. Bouacha , M.A. Yallese , Tarek Mabrouki , Jean Francois Rigal
International Journal of Refractory Metals and Hard Materials, 2010, 28 (3), pp.349-361. ⟨10.1016/j.ijrmhm.2009.11.011⟩
Article dans une revue istex hal-00502239 v1

On the tool vibration effects during down-cut peripheral milling process

Muhammad Asad , Tarek Mabrouki , Jean Francois Rigal
International Journal on Interactive Design and Manufacturing, 2010, 4 (4), pp.215-225
Article dans une revue hal-00581093 v1

Machinability investigation in hard turning of AISI H11 hot work steel with CBN tool

H. Aouici , M.A. Yallese , B. Fnides , Tarek Mabrouki
Mechanika, 2010, 6 (86), pp.71-77
Article dans une revue hal-00581089 v1

On the identification conditions of a constitutive model in machining of aisi 1045 steel

Cedric Courbon , Tarek Mabrouki , Joel Rech , Jean-Francois Rigal , Denis Mazuyer et al.
International Journal of Material Forming, 2010, 3, pp.439-442. ⟨10.1007/s12289-010-0801-5⟩
Article dans une revue hal-00951066 v1

Experimental investigation and performance analyses of CBN insert in hard turning of cold work tool steel (D3)

H. Bouchelaghem , M.A. Yallese , Tarek Mabrouki , Abdelkrim Amirat , Jean Francois Rigal
Journal of Machining Science and Technology, 2010, 14 (4), pp.471-501. ⟨10.1080/10910344.2010.533621⟩
Article dans une revue hal-00581087 v1
Image document

Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming

Philippe Boisse , Yamina Aimene , A. Dogui , Samia Dridi , Sébastien Gatouillat et al.
International Journal of Material Forming, 2010, 3, pp.1229-1240. ⟨10.1007/s12289-009-0664-9⟩
Article dans une revue hal-00502248 v1

NUMERICAL AND EXPERIMENTAL FORMING ANALYSIS OF WOVEN COMPOSITES WITH DOUBLE DOME BENCHMARK

M. A. Khan , T. Mabrouki , P. Boisse
International Journal of Material Forming, 2009, 2 (1), pp.201-204. ⟨10.1007/s12289-009-0549-y⟩
Article dans une revue hal-04711830 v1

A finite element based hybrid dynamic cutting model for an aluminium alloy milling

Muhammad Asad , Tarek Mabrouki , Jean-François Rigal
Proceedings of the Institution of Mechanical Engineers. Part B, Management and Engineering Manufacture, 2009, 224, pp.1-13
Article dans une revue hal-00485505 v1

Surface roughness model in turning hardened hot work steel using mixed ceramic tool

Brahim Fnides , Mohamed Athmane Yallese , Tarek Mabrouki , Jean-Francois Rigal
Mechanika, 2009, 77, pp.68-73
Article dans une revue hal-00938579 v1

A Smart Machining Systems application to reduce the machining costs within a multi-process production

Jean Francois Rigal , Tarek Mabrouki
International Journal of Mechatronics and Manufacturing Systems, 2009, 2 (5-6), pp.505-515
Article dans une revue hal-00504158 v1

Preforming simulation of the reinforcements of woven composites: continuous approach within a commercial code

Muhammad Aurangzeb Khan , Tarek Mabrouki , S. Gauthier , Emmanuelle Vidal-Salle , Philippe Boisse
International Journal of Material Forming, 2008, 1 (S1), pp.879-882. ⟨10.1007/s12289-008-0236-4⟩
Article dans une revue hal-00506215 v1

Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)

Tarek Mabrouki , François Girardin , Muhammad Asad , Jean-François Rigal
International Journal of Machine Tools & Manufacture, 2008, 48 (11), pp.1187-1197. ⟨10.1016/j.ijmachtools.2008.03.013⟩
Article dans une revue istex hal-00383575 v1

Dry cutting study of an aluminium alloy (A2024-T351): a numerical and experimental approach

M. Asad , F. Girardin , T. Mabrouki , J-F. Rigal
International Journal of Material Forming, 2008, 1 (1), pp.499-502. ⟨10.1007/s12289-008-0150-9⟩
Article dans une revue hal-04712041 v1

Draping of textile composite reinforcements: Continuous and discrete approaches

Philippe Boisse , Nahiene Hamila , Fabrice Helenon , Yamina Aimene , Tarek Mabrouki
Advanced composites letters, 2007, pp.125-131
Article dans une revue hal-00380764 v1

A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning

Tarek Mabrouki , Jean-Francois Rigal
Journal of Materials Processing Technology, 2006, 176 (1-3), pp.214-221. ⟨10.1016/j.jmatprotec.2006.03.159⟩
Article dans une revue istex hal-00938632 v1

Experimental and numerical study of chip formation during straight turning of hardened AISI 4340 steel

S. Belhadi , Tarek Mabrouki , J-F Rigal , L. Boulanouar
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2005, 219 (7), pp.515-524. ⟨10.1243/095440505X32445⟩
Article dans une revue istex hal-00368444 v1

Experimental analysis of high-speed air-water jet flow in an abrasive water jet mixing tube

A.H. Osman , T. Mabrouki , B. Thery , Daniel Buisine
Flow Measurement and Instrumentation, 2004, 15 (1), pp.37-48
Article dans une revue hal-00138087 v1
Image document

Modélisation et expérimentation du décapage par jet d'eau haute pression

Tarek Mabrouki , Alain Cornier , Hafiz Osman , Kadour Raïssi
Mechanics & Industry, 2004, 5, pp.11-25. ⟨10.1051/meca:2004003⟩
Article dans une revue hal-00021161 v1

Experimental analysis of high-speed air-water jet flow in an abrasive water jet mixing tube

Hafiz Osman , Tarek Mabrouki , B. Thery , D. Buisine
Flow Measurement and Instrumentation, 2004, pp.37-48
Article dans une revue hal-00450604 v1
Image document

Stripping process modelling: interaction between a moving waterjet and coated target

Tarek Mabrouki , Kadour Raissi
International Journal of Machine Tools and Manufacture, 2002, 42 (11), pp.1247-1258. ⟨10.1016/S0890-6955(02)00052-4⟩
Article dans une revue hal-00021142 v1
Image document

Prédiction du comportement vibratoire du fraisage latéral de finition des pièces à parois minces

François Lapujolade , Tarek Mabrouki , Kadour Raïssi
Mechanics & Industry, 2002, 3 (4), pp.403-408
Article dans une revue hal-00021146 v1

Stripping process modelling: interaction between a moving waterjet and coated target

Tarek Mabrouki , K. Raissi
International Journal of Machine Tools & Manufacture, 2002, pp.1247-1258
Article dans une revue hal-00454906 v1

A numerical simulation and experimental study of the interaction between a pure high-velocity waterjet and targets : contribution to investigate the decoating process

Tarek Mabrouki , K. Raissi , A. Cornier
Wear, 2000, pp.260-273
Article dans une revue hal-00450330 v1
Image document

Modélisation et simulation numérique de l'emboutissage d'un renfort tissé sec : Sensibilité de l'angle de cisaillement aux paramètres du procédé

Abderrahmen Aridhi , Tarek Mabrouki , Makrem Arfaoui , Naim Naouar , Philippe Boisse et al.
CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France
Communication dans un congrès hal-03465447 v1
Image document

ON NUMERICAL STRATEGY FOR TOOL WEAR MODELLING DURING AISI 4140 CUTTING

Mayssa Guediche , T Mabrouki , C Donnet , Jean-Michel Bergheau , Hédi Hamdi
International Conference on Computational Methods in Manufacturing Processes, ICOMP'2016, May 2016, Liège, Belgium
Communication dans un congrès hal-01416301 v1

Iterative Lagrangian Model of Broaching to Study Cutting Forces, Temperatures and Chip Formation

D. Fabre , C. Bonnet , J. Rech , T. Mabrouki
PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), Apr 2016, 2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA, Unknown Region. ⟨10.1063/1.4963478⟩
Communication dans un congrès hal-04708240 v1
Image document

Modeling and optimization of tool wear and surface roughness in turning of austenitic stainless steel using response surface methodology

Sofian Berkani , Lakhdar Bouzid , Hamza Bensouilah , Mohamed Athman Yallese , François Girardin et al.
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03446160 v1
Image document

A New Procedure to Increase the Orthogonal Cutting Machining Time Simulated

Mayssa Guediche , Tarek Mabrouki , Jean-Michel Bergheau , Christophe Donnet , Hédi Hamdi
CIRP Conference on Modelling and Machining Operations, Jun 2015, Karlsruhe, Germany. pp.299 - 303, ⟨10.1016/j.procir.2015.04.096⟩
Communication dans un congrès hal-01416273 v1
Image document

Analytical modeling of material removal process in the case of orthogonal cutting and worn tools

Ferdinando Salvatore , Tarek Mabrouki , Hedi Hamdi
12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France
Communication dans un congrès hal-01515077 v1
Image document

Nouvelle procédure pour l'augmentation du temps d'usinage simulé en coupe orthogonale

Mayssa Guediche , Tarek Mabrouki , Christophe Donnet , Jean-Michel Bergheau , Hedi Hamdi
12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France
Communication dans un congrès hal-01514291 v1

Towards a physical FE modelling of a dry cutting operation: influence of dynamic recrystallization when machining AISI 1045

C. Courbon , T. Mabrouki , Jérôme Rech , D. Mazuyer , F. Perrard et al.
14TH CIRP CONFERENCE ON MODELING OF MACHINING OPERATIONS (CIRP CMMO), Jun 2013, SARA BURGERHARTSTRAAT 25, PO BOX 211, 1000 AE AMSTERDAM, Netherlands. pp.516-521, ⟨10.1016/j.procir.2013.06.143⟩
Communication dans un congrès hal-04710809 v1
Image document

Étude des perturbations thermiques induites par des hétérogénéités de contact à l'interface outil-copeau en usinage

Cédric Courbon , Tarek Mabrouki , Joël Rech , Denis Mazuyer , Enrico d'Eramo
CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France
Communication dans un congrès hal-03440628 v1
Image document

The use of numerical simulations to improve analytical chip formation model

Ferdinando Salvatore , Tarek Mabrouki , Hedi Hamdi
10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB
Communication dans un congrès hal-00592695 v1

A FE-approach on the influence of material strengthening factors on size effect during macro-to-micro scale millingl

Muhammad Asad , Tarek Mabrouki , Jean Francois Rigal
4th International conference on Tribology in Manufacturing Processes, Jun 2010, Nice, France. pp.CDRom
Communication dans un congrès hal-00504170 v1

On the identification conditions of a constitutive model in machining of AISI 1045 steel

C. Courbon , Tarek Mabrouki , Joël Rech , Jean Francois Rigal , Denis Mazuyer et al.
ESAFORM2010, Apr 2010, BRESCIA, Italy. pp.CDRom
Communication dans un congrès hal-00504167 v1

Towards a better definition of the mechanical and thermal interface behaviour in dry cutting simulation of AISI 1045 steel

C. Courbon , Tarek Mabrouki , Joël Rech , Denis Mazuyer , E. d'Eramo et al.
4th International conference on Tribology in Manufacturing Processes, Jun 2010, Nice, France. pp.CD ROM
Communication dans un congrès hal-00504197 v1

ANALYTICAL MODEL FOR CHIP FORMATION IN CASE OF ORTHOGONAL MACHINING PROCESS

Ferdinando Salvatore , Tarek Mabrouki , Hedi Hamdi
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, Oct 2010, 2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA, Unknown Region. pp.1621+
Communication dans un congrès hal-04711755 v1

Analytical model of removal material in the case of cutting and abrasion processes

F. Salvatore , Tarek Mabrouki , H. Hamdi
4th International conference on Tribology in Manufacturing Processes, Jun 2010, Nice, France. pp.CD ROM
Communication dans un congrès hal-00504176 v1

Identification of limiting shear stress at tool-chip interface - Towards an improved FEmodel of Titanium alloy (Ti-6Al-4V) cutting

Y. Zhang , Tarek Mabrouki , Daniel Nelias , Y.D. Gong
4th International conference on Tribology in Manufacturing Processes, Jun 2010, Nice, France. pp.CD ROM
Communication dans un congrès hal-00504174 v1

Composite reinforcement forming simulation: a multiscale approach

Nahiene Hamila , Muhammad Aurangzeb Khan , Sébastien Gatouillat , Emmanuel de Luycker , Emmanuelle Vidal-Salle et al.
ICCM17, Jul 2009, Edimburg, United Kingdom. pp.1-10
Communication dans un congrès hal-00464204 v1

Prédiction de la morphologie du copeau durant le fraisage dun alliage daluminium aéronautique (A2024-T351)

M. Asad , Tarek Mabrouki , Jean-François Rigal
13ème Session MANUFACTURING 21, Apr 2008, France
Communication dans un congrès hal-00506210 v1
Image document

A Study of the Effects of Friction Coefficient on Chip Formation Based on Hard Turning Thermo-mechanical Model

Yancheng Zhang , Yadong Gong , Jian Qiu , Tarek Mabrouki , Daniel Nelias
Chinese Control and Decision Conference, CCDC, Jul 2008, Yantai, China. pp.4925+, ⟨10.1109/CCDC.2008.4598264⟩
Communication dans un congrès hal-04712439 v1

Dry cutting study of an aluminium alloy (a2024-t351) : a numerical and experimental approach" Key note paper

M. Asad , François Girardin , Tarek Mabrouki , Jean-François Rigal
11th ESAFORM2008 conference on material forming., Apr 2008, France
Communication dans un congrès hal-00506211 v1

Un modèle elements finis pour simuler le fraisage d'un alliage d'aluminium

M. Asad , Tarek Mabrouki , Jean-François Rigal
5èmes ASSISES Machines et Usinage à Grande Vitesse, Jun 2008, France
Communication dans un congrès hal-00506219 v1

Numerical and experimental approach for an aluminium alloy micro-milling

M. Asad , C. Hignette , Tarek Mabrouki , Jean-François Rigal
2nd international conferance on innovative cutting processes and smart machining, Oct 2008, France
Communication dans un congrès hal-00506209 v1

Simulations of one-layer and multi-layer composite forming

Nahiene Hamila , Fabrice Helenon , Philippe Boisse , Tarek Mabrouki , Emmanuel de Luycker et al.
10TH ESAFORM CONFERENCE ON MATERIAL FORMING, Apr 2007, Espagne
Communication dans un congrès hal-00506645 v1

Fundamental understanding of the segmented chip genesis for smart machining, a contribution in hard material turning

Tarek Mabrouki , S. Belhadi , Jean-François Rigal
6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, French AIP PRIMECA Network; Inter Inst Product Workshops; Pole Resources Informat Mecan; Comp Resource Pole Mech, May 2006, Grenoble, France. pp.443-459, ⟨10.1007/978-1-4020-6761-7_30⟩
Communication dans un congrès istex hal-00381272 v1

Etude dynamique de la formation du copeau Contribution : un modèle de simulation numérique pour le fraisage des alliages daluminium

M. Asad , François Girardin , Tarek Mabrouki , Jean-François Rigal
10ème coll. Nat. AIP PRIMECA, Apr 2007, France
Communication dans un congrès hal-00506644 v1

Mise en oeuvre du logiciel ESPRIT au pôle AIP-PRIMECA RAO

A. Valisolalo , J.-F. Clavier , Jean Francois Rigal , Tarek Mabrouki , A. Toumine
Journées PRIMECA, La chaîne numérique de la CFAO à la fabrication, 2006, Compiègne, France
Communication dans un congrès hal-00432824 v1

Fundamental understanding of the segmented chip genesisfor smart machining, a contribution in hard material turning

Tarek Mabrouki , S. Belhadi , Jean-François Rigal
Int. Conf. on Interg. Design and Manuf. Mech. Eng, (IDMME06), May 2006, France
Communication dans un congrès hal-00506925 v1

On some thermo-mechanical effects during chip genesis in hard turning

Tarek Mabrouki , S. Belhadi , Jean-François Rigal
5th Int. Conf. on High Speed Machining, Mar 2006, France
Communication dans un congrès hal-00506886 v1

Etude des effets thermécaniques lors de la simulation de la formation d'un copeau en TD et en UGV

Tarek Mabrouki
2ème PPF Simulation numérique des conséquences métallurgiques et mécaniques induites par les procédés mettant en jeu des hautes températures, 2005, St. GALMIER, France
Communication dans un congrès hal-00429968 v1

Serrated-chip formation prediction : Modelling method and experimental results

Tarek Mabrouki , Laurent Deshayes , Jean-François Rigal
5th International Conference on Intergrated Design and Manufacture in Mechanical Engineering, Apr 2004, Royaume-Uni
Communication dans un congrès hal-00507353 v1

On the modelling of serrated chip formation

Tarek Mabrouki , Laurent Deshayes , Jean-François Rigal
The 7th Esaform Conference on Material Forming ESAFORM 2004, Apr 2004, Norvège
Communication dans un congrès hal-00507326 v1

Modélisation et simulation temporelle du comportement dynamique des plaques minces en fraisage latéral de finition

F. Lapujoulade , K. Raissi , Tarek Mabrouki
2ème Assises Machines et Usinage Grande Vitesse ENSAM, Mar 2003, France
Communication dans un congrès hal-00507984 v1

Détermination de la plage des vitesses de coupe. Extension de l'activité du COM (Couple Outil Matière) avec le système POM (Pièce Outil Machine)

Laurent Deshayes , Jean-François Rigal , Tarek Mabrouki
Colloque sur la Maîtrise des Systèmes Complexes, AIP-PRIMECA, Apr 2003, France
Communication dans un congrès hal-00507910 v1

Some Difficulties in the Flow Front Treatment in Fixed Mesh Simulations of Composites Forming Processes

Francisco Chinesta , Tarek Mabrouki , Antonio Ramón
5th ESAFORM Conference on Material Forming, 2002, Krakow, Poland. pp.295-298
Communication dans un congrès hal-00020789 v1

Prédiction du comportement dynamique en fraisage latéral de finition des plaques minces

F. Lapujoulade , K. Raissi , Tarek Mabrouki
8ème PPF (Programme Pluri-Formations) sur la Maïtrise Globale du Procédé d'Enlèvement de Matière et des Techniques Associées. CER-ENSAM, Dec 2001, France
Communication dans un congrès hal-00508092 v1

Experimental investigation and numerical modeling of H.P. pure waterjet impingement in the aeronautical decoating process

Tarek Mabrouki , A. Cornier , K. Raissi
13th Int. Conf. On Surface Treatments in the Aeronautical and Aerospace Industries, SURFAIR2000, Jun 2000, France
Communication dans un congrès hal-00508196 v1

Numerical simulation of high velocity pure waterjet impingement on coated material

Tarek Mabrouki , K. Raissi , A. Cornier
15th Int. Conf. On Jetting Technology, Sep 2000, Suisse
Communication dans un congrès hal-00508195 v1